rijve044 Posted July 3, 2010 Share #1 Posted July 3, 2010 Advertisement (gone after registration) Hello I'm new on this forum. Can somebody help me/give me some links: -Is there a calibration procedure for MR/MC meters especially the MR with the 2 variable resistors 10 kohm and 5 kohm? -Is there a substitute available for the MC/MR photo cells? Thanks. Dre Link to post Share on other sites More sharing options...
Advertisement Posted July 3, 2010 Posted July 3, 2010 Hi rijve044, Take a look here Leicameter MR/MC calibration procedure. I'm sure you'll find what you were looking for!
Artorius Posted July 5, 2010 Share #2 Posted July 5, 2010 Try here; Mick Feuerbacher photography Good info for the MR4. Link to post Share on other sites More sharing options...
octo Posted July 13, 2010 Share #3 Posted July 13, 2010 Hello I'm new on this forum. Can somebody help me/give me some links: -Is there a calibration procedure for MR/MC meters especially the MR with the 2 variable resistors 10 kohm and 5 kohm? Go to www.orphancameras.com where you'll find Leica listed in the left hand column; open it and scroll down until you find the manual that you need. Page 13 should help you. Regards. Link to post Share on other sites More sharing options...
wlaidlaw Posted July 15, 2010 Share #4 Posted July 15, 2010 Mick Feuerbacher mentions leaking mercury cells. Mercury cells are potentially horrible things. Just one cell thoughtlessly disposed of, can poison up to 5 cubic meters of soil. The glop that oozes out of them when discharged, can also do horrible things to electronics and other precision bits. I have a very dead Minox C as witness to this. Now that they have been officially out of production in most countries for some years, it is now unlikely that many people are still using them. There is an issue with using the silver equivalents, in that the voltage comes out at around 6.1 - 6.2V for a 4 cell battery rather than the correct 5.6V. This may affect the reading on both older Leicameters and the older Minoxes, which don't have an internal voltage regulator. There used to be a small holder which took 4 x 386 silver cells and incorporated a voltage regulator but it does not seem to be available any more. For those like me, who still use the older Minox C cameras, 5.6V mercury PX27 cells can still be bought in Vietnam but please do dispose of them in the disposal boxes available at many pharmacies and I would suggest taking them out of a camera/meter when not in regular use. Wilson Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.