Gerjan Posted January 21, 2010 Share #1 Posted January 21, 2010 Advertisement (gone after registration) To start with thanks to everybody who answered on my question about Software! As a beginner I have another question: I have 3 lenses 35/50/90mm I have not used them with my M6 for a long time. With my new M8 I use the 35mm, when I sharpen an object further than 3 meters turning the lens around is quiet heavy. Is there any material like thin/special oil I can use to make the lens turn around smooth? Thanks for any answer, Gerjan Link to post Share on other sites More sharing options...
Advertisement Posted January 21, 2010 Posted January 21, 2010 Hi Gerjan, Take a look here Problem with lenses. I'm sure you'll find what you were looking for!
Michiel Fokkema Posted January 21, 2010 Share #2 Posted January 21, 2010 Better not do it yourself. Will van Manen in Zoetermeer is the best tecnician I know. He has done a lot of work for me. index.html Cheers, Michiel Fokkema Link to post Share on other sites More sharing options...
Maarten Posted January 21, 2010 Share #3 Posted January 21, 2010 I second that! Will gave a couple of my lenses a CLA and especially the 35mm Summicron is joy to use again! Link to post Share on other sites More sharing options...
sandro Posted January 21, 2010 Share #4 Posted January 21, 2010 I agree: both Leica bodies and lenses I brought to Will van Manen were thorougly cleaned and they handle again as they should. Old grease dries out, both in lenses and camera's and Will van Manen replaces it with better, modern kinds of grease. Link to post Share on other sites More sharing options...
Guest tvleeskr Posted January 21, 2010 Share #5 Posted January 21, 2010 Hi, I too am a fan of Will. I would suggest to take the entire kit to Will to have the RF checked and -if needed- adjusted and to CLA the three lenses. Back- or front focusing can be so frustrating! Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.