Joe 90 Posted March 28, 2008 Share #1 Posted March 28, 2008 Advertisement (gone after registration) This red stripe has appeared on about 6 out of 36 slides. It always occurs in exactly the same place, but on some pictures it is especially faint, and hardly noticable. The stripe is always red, always upright, always in exactly the same positionon on the slide. Any help appreciated. Welcome, dear visitor! As registered member you'd see an image here… Simply register for free here – We are always happy to welcome new members! Link to post Share on other sites Simply register for free here – We are always happy to welcome new members! ' data-webShareUrl='https://www.l-camera-forum.com/topic/49108-r5-red-stripe-on-pictures-any-ideas-please/?do=findComment&comment=522254'>More sharing options...
Advertisement Posted March 28, 2008 Posted March 28, 2008 Hi Joe 90, Take a look here R5: Red stripe on pictures. Any ideas please?. I'm sure you'll find what you were looking for!
rob_x2004 Posted March 28, 2008 Share #2 Posted March 28, 2008 On an R5 I would be guessing where, but I would suggest it has to be a light leak from somewhere, and being in exactly the same place it must e getting in on the flat section of film somewhere between the film can and the take up spool. Time for a CLA and new seals. ps..what colour is the stripe on prints from normal c41 negative. Link to post Share on other sites More sharing options...
nobbylon Posted March 28, 2008 Share #3 Posted March 28, 2008 yep, light leak from rear of cam Link to post Share on other sites More sharing options...
adan Posted March 28, 2008 Share #4 Posted March 28, 2008 Likely the foam rubber seal around the window in the back that shows you the film cassette to identify which film is loaded is getting stale and corroded, and allowing light to leak in. All that black foam, (the stuff the mirror hits when it swings up, also) tends to turn into black goo after about 15-20 years. Fairly common with aging R4/R5s. You may even be able to replace the foam seal in the back yourself, if that is what it turns out to be. A simple peel-and-stick job once you've removed the old foam. The reason it is intermittent and varies in brightness is that it is a very faint leak, and will vary with how strong the light is hitting the leak point, and how long you left the film in one place between exposures. Crazy-making - but easier to solve than some camera problems. (The red coloring is also because it is a slow leak - red light always seems to penetrate a bit further, noticeable in the red/orange/yellow smear you get on slide film right where the exposed leader transitions to the film that was protected by the cassette during loading.) Link to post Share on other sites More sharing options...
nobbylon Posted March 28, 2008 Share #5 Posted March 28, 2008 get your new seal kit here, Favorite Classics / Jon Goodman's Seal Replacement Instructions The Finest Complete Camera Light Seal Foam Kit - PROOF! on eBay, also, Parts Repair, Film Cameras, Cameras Photo (end time 04-Apr-08 00:41:01 BST) Jon sells under user name interslice on the evilbay, great service, great kit and the job is surprisingly easy to do. Link to post Share on other sites More sharing options...
earleygallery Posted March 28, 2008 Share #6 Posted March 28, 2008 I had the same problem on my R3. Leica UK sent me a new foam for the film 'window' and I also bought a kit from 'interslice' to replace the other seals (would be easy to make a piece for the window from the kit anyway) which had indeed turned to goo, it took me about 1hr to do the job and now all is well again. Link to post Share on other sites More sharing options...
Guest suilvenman Posted March 28, 2008 Share #7 Posted March 28, 2008 Advertisement (gone after registration) Would that be the Chateau de Chinon on the photo by any chance? Cheers, Ken. Link to post Share on other sites More sharing options...
Joe 90 Posted March 29, 2008 Author Share #8 Posted March 29, 2008 I've had a look, and the light seal around the film window is very crumbly. This has to be it. This ties in well with the shots that have the stripe, as shots taken in the Chateau where the film window was protected from direct sun are OK. The shot here was taken from the deck of a boat, with the camera in full sun for some time. Ken, you are right about the picture, Chateau de Chillon, on Lake Geneva. I bought the R5 off an auction site recently, and this issue only showed up for the first time after 4 or so rolls. I didn't notice it at all on earlier films. I will be loading some Kodachrome 64 today, and it will probably be a while before I get the slides back to check them. I will use a windowless back from a Minolta XD7 until I fix the seal properly and then test that with print film that I can process locally. I don't want this to put readers off buying old R bodies! I also bought an R4 MOT sold 'as defective', by a dealer a year ago, and have put a few rolls through that too with good results. Thanks for all the replies! Link to post Share on other sites More sharing options...
rob_x2004 Posted March 29, 2008 Share #9 Posted March 29, 2008 I will use a windowless back from a Minolta XD7 until I fix the seal properly Probably find the minoltas better built or deteriorate less with time. Dunno. The one I inherited certainly aged better than my 6.2. But hten if I want to I can get the Leica serviced. How come you dont jsut tape over the window since changing the back doesnt replace your door Welcome, dear visitor! As registered member you'd see an image here… Simply register for free here – We are always happy to welcome new members! ? Link to post Share on other sites Simply register for free here – We are always happy to welcome new members! ? ' data-webShareUrl='https://www.l-camera-forum.com/topic/49108-r5-red-stripe-on-pictures-any-ideas-please/?do=findComment&comment=523188'>More sharing options...
Joe 90 Posted March 29, 2008 Author Share #10 Posted March 29, 2008 The Minoltas seem to age about the same, and are much lighter. They are not as strong. I did break off the Minolta flash mount quite easily. Bits like that are nothing like as solid. However, the back is a solid door, exactly the same as the R4, but no window and with a metal spring where the window foam is to keep pressure on the film can. The R5 back door has a slightly finer pattern on the film pressure plate surface. Not sure what difference that makes. Link to post Share on other sites More sharing options...
StFreud Posted March 29, 2008 Share #11 Posted March 29, 2008 You´ve got a email. Regards, S.F. Link to post Share on other sites More sharing options...
mirror Posted October 30, 2008 Share #12 Posted October 30, 2008 Hello, other Leica users! My first post here. I met a little problem with my R3, similar to original question. Most probably only film cassette window need new seal, becauce there have no seal at all! Other seal looks good - maybe sometimes changed after the factory. Picture attached shows window. I can't determine, how thick seal it needs. I have never seen original and trying with film cassette it is impossible to see how deep cassette bends the strings. best regards, Kimmo Manner, Finland Welcome, dear visitor! As registered member you'd see an image here… Simply register for free here – We are always happy to welcome new members! Link to post Share on other sites Simply register for free here – We are always happy to welcome new members! ' data-webShareUrl='https://www.l-camera-forum.com/topic/49108-r5-red-stripe-on-pictures-any-ideas-please/?do=findComment&comment=700488'>More sharing options...
mirror Posted October 30, 2008 Share #13 Posted October 30, 2008 I put there 3mm thick seal and not cutted hole to it. So one must remember what film is inside. Now testing with film. I think to let camera to the good light almost all the day and then move film to next shoot and wait little more before developing piece of B&W film. 3mm was thickest foam in Jon Goodman's seal kit. Link to post Share on other sites More sharing options...
earleygallery Posted November 1, 2008 Share #14 Posted November 1, 2008 If you contact Leica they might send you a replacement seal. Anyway, 3mm is about right. The other option is just to tape over the outside of the window, I rarely have a film in the camera long enough to forget what's in there! Link to post Share on other sites More sharing options...
mirror Posted November 2, 2008 Share #15 Posted November 2, 2008 Thank you James. Nice to hear. I have not yet developed test film, but I expect good. I will sell this R3 body. I have R8 now and with it I desided sell my Nikons away mostly - after 30 years nice company. F2, F3, F4.. F2 only stay with me, perhaps. I have been very satisfied with Nikkor Ai lenses, but never met personally perfect body for those. With little winder R8 is what I have always hoped. I need to make friends to Leitz lenses which is not sad thing with all the time lowering prices. Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.