zaln Posted February 22, 2008 Share #1 Posted February 22, 2008 Advertisement (gone after registration) I just receive a nice Telyt 200/4 but I have some problem with it. Telyt + Viso III + OUBIO not problem ; it focus at infinity. But haw can I attach the Telyt at the bellow II? II have the 16598 adapter ring ( really the 16598J) but is not good for connect the full telyt ad the bellow . I read that for attach the telyt at the bellow II I must use the “optical group” but I’m not able to separate the “optical group” from the focus “elicoide”. I can separate only the first part of the “optical group” at the diaphragm point (but this is only half of the optical goup) In any way also with this partial “optical group “ I can not use the adapter 16598 (j). Some help please Giorgio Link to post Share on other sites More sharing options...
Advertisement Posted February 22, 2008 Posted February 22, 2008 Hi zaln, Take a look here Help for a telyt 200. I'm sure you'll find what you were looking for!
mhoersch Posted February 23, 2008 Share #2 Posted February 23, 2008 High Giorgio, you need to remove only the OUBIO and then screw the whole lens into an dapter 16590 which screws into the bellows. If you look in eBay there should be one or two adapters for sale right now. Just look for "Leica 16590". Link to post Share on other sites More sharing options...
tobey bilek Posted February 24, 2008 Share #3 Posted February 24, 2008 Unscrew the optics and it may be hard afer 40 years. 280, 120, 135 some 90`s are all the same Link to post Share on other sites More sharing options...
zaln Posted February 24, 2008 Author Share #4 Posted February 24, 2008 Very good suggestion . I will look for the 1590 adapter . It sound very logical. I was so involve on the idea of to use the “optical group” that I do not look for the most logical solution. Thanks a lot. Giorgio Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.