jamesto Posted February 1, 2008 Share #1 Posted February 1, 2008 Advertisement (gone after registration) Having read the news about an M8 upgrade, I wonder if the same or similar upgrades could be done for a DMR too? Any thoughts on this? I for one, would be very keen on getting sapphire glass on my LCD screen! Look forward to your comments! Link to post Share on other sites More sharing options...
Advertisement Posted February 1, 2008 Posted February 1, 2008 Hi jamesto, Take a look here M8 Upgrade For DMR Too?. I'm sure you'll find what you were looking for!
andybarton Posted February 1, 2008 Share #2 Posted February 1, 2008 I most certainly wouldn't want my chip downgraded to an M8, thanks very much. Leica never made the DMR, and they have fallen out with those that did. An upgrade to the DMR just isn't going to happen. The R10 will be along later this year, with a fair wind. That will be in the control of Leica themselves and will, therefore, be in their control with regards to Firmware and other potential enhancements. Link to post Share on other sites More sharing options...
spylaw4 Posted February 1, 2008 Share #3 Posted February 1, 2008 Let us hope that they have learnt something from the M8 saga! Link to post Share on other sites More sharing options...
jc_braconi Posted February 4, 2008 Share #4 Posted February 4, 2008 I most certainly wouldn't want my chip downgraded to an M8, thanks very much. Leica never made the DMR, and they have fallen out with those that did. An upgrade to the DMR just isn't going to happen. . Andy, do you upgraded the DMR with the firmware 1.3 ? mine is 1.1 Link to post Share on other sites More sharing options...
marknorton Posted February 4, 2008 Share #5 Posted February 4, 2008 I was interested to see that the sensor used in the DMR - the KAF10010 - is now shown on the Kodak site as "Discontinued". Link to post Share on other sites More sharing options...
andybarton Posted February 4, 2008 Share #6 Posted February 4, 2008 Andy, do you upgraded the DMR with the firmware 1.3 ? mine is 1.1 Yes, I am using v1.3 and I have had no problems with it. Link to post Share on other sites More sharing options...
stuny Posted February 4, 2008 Share #7 Posted February 4, 2008 Advertisement (gone after registration) JC - There seems to be nearly universal praise for DMR firmware version 1.3. I agree. Link to post Share on other sites More sharing options...
Iron Flatline Posted February 4, 2008 Share #8 Posted February 4, 2008 I expect the R10 to be upgradable as well. Link to post Share on other sites More sharing options...
jc_braconi Posted February 4, 2008 Share #9 Posted February 4, 2008 Thanks Andy & Stuart, I installed the 1.3, must format the SD after saving the files, I have read this in the instructions for install when you upgrade from 1.1 to 1.3. just made one shot, looks OK. Link to post Share on other sites More sharing options...
bill Posted February 4, 2008 Share #10 Posted February 4, 2008 I expect the R10 to be upgradable as well. That's entirely reasonable. Anything else would be howled down as a "retrograde" step... Regards, Bill Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.