SL3-S Battery/No memory card information after charging externally in BC-SCL6 charger

[MikeZ]

Advertisement (gone after registration)

I've been using Lexar and Sandisk without any issue.  It might be worth trying a memory card from a different manufacturer.

[V23]

On 11/2/2025 at 12:09 AM, teilor said:

I’m experiencing the same issue. Have you received any response from Leica? I’m using sl3.

No reply from Leica thus far as of 3.11.2025. I am not holding my breath. Both cameras SL3 and the SL3S are functioning without fail, no plan to replace OWC cards.

[V23]

On 11/2/2025 at 8:12 AM, algrove said:

I have had issues with OWC cards and devices so I now steer clear of OWC.

 

OP, how about Sandisk Extreme Pro cards? Mine are fine.

I have just try following: replacing OWC 512GB card with a SanDisk Professional Pro 64GB (the highest capacity that I have) popping battery out for a moment (whilst camera power is off) inserting battery in and switching camera on I can see tiny of a fraction of a second same message ‘No memory card, Please insert memory card’ message. So, this indicates to me that it is not OWC card generating this message, but something else. It would be interesting to see if the SanDisk Professional Pro 512GB would generate same message for longer relatively speaking moment.

[teilor]

4 hours ago, V23 said:

No reply from Leica thus far as of 3.11.2025. I am not holding my breath. Both cameras SL3 and the SL3S are functioning without fail, no plan to replace OWC cards.

It’s been six months already — this is really unacceptable.

Shouldn’t they at least provide an answer about whether there’s an issue or not?

[LocalHero1953]

I have recently switched from SL2-S to SL3-S, but have not noticed this issue. I am using a Sandisk Extreme Pro V90 256Gb SD card and Delkin Black and Delkin Green 1 Tb CFe cards. 

[algrove]

11 hours ago, V23 said:

 

I have just try following: replacing OWC 512GB card with a SanDisk Professional Pro 64GB (the highest capacity that I have) popping battery out for a moment (whilst camera power is off) inserting battery in and switching camera on I can see tiny of a fraction of a second same message ‘No memory card, Please insert memory card’ message. So, this indicates to me that it is not OWC card generating this message, but something else. It would be interesting to see if the SanDisk Professional Pro 512GB would generate same message for longer relatively speaking moment.

Are you switching one slot at a time? 

Maybe you did this, but empty both slots and then insert one at a time with Sandisk, perhaps. Turn on camera after each insert to see how it works.

 

Not clear have you contacted Leica about this issue and if yes, what was their suggestion?