Fidi Posted March 21 Share #1 Posted March 21 Advertisement (gone after registration) Does Leica M9 with Voigtlander Nokton Classic MC 35mm f/1.4 II VM needs a neutral density filter? And if so what do you recommend? Link to post Share on other sites More sharing options...
Advertisement Posted March 21 Posted March 21 Hi Fidi, Take a look here ND filter. I'm sure you'll find what you were looking for!
jaapv Posted March 21 Share #2 Posted March 21 A lens does not need an ND filter. A specific subject sometimes does when you need a long shutter time in bright light. 1 Link to post Share on other sites More sharing options...
Fidi Posted March 21 Author Share #3 Posted March 21 2 minutes ago, jaapv said: A lens does not need an ND filter. A specific subject sometimes does when you need a long shutter time in bright light. Thank you jjapv! I should have been more precise with my first question. In fact, I've always put some on my cameras just to protect the glass from scratching, but as I now have my dream camera, I wanted to know if there could be variations in the results with a ND filter on this lens and camera. Link to post Share on other sites More sharing options...
jaapv Posted March 21 Share #4 Posted March 21 For protecting lenses use a protective filter as provided by the major suppliers. Like B+W 007 Use an ND filter if you want to reduce the amount of light transmitted by the lens. 1 Link to post Share on other sites More sharing options...
PhotoCruiser Posted March 21 Share #5 Posted March 21 vor 2 Stunden schrieb jaapv: For protecting lenses use a protective filter as provided by the major suppliers. Exactly! In earlier times i used UV filters for that, now i got the Sigma WR Ceramic Protector and could not find problems, but did not tested in-depth. But for my Sigma 105mm Macro, not the Voigtlander but i would expect that it will fit also the Voigtlander as long the diameter is correct. As Jaapv stated, a ND Filter is to reduce light if you want o have slow shutter speed or the lens wide open on a bright day. Chris Link to post Share on other sites More sharing options...
LocalHero1953 Posted March 21 Share #6 Posted March 21 (edited) I suspect you're thinking about a UV filter. I use them for lenses where the front element surface is close to the front of the lens with little protection, but if it's deep set I don't bother. But also relevant to your case, I used an IR cut filter on my M9 i.e. a filter to eliminate the IR frequencies which I often found caused skin tone problems with the M9 sensor. The M8 (M8.1) had a major problem with IR, and Leica didn't really eliminate it till the M240. Edited March 21 by LocalHero1953 Link to post Share on other sites More sharing options...
Fidi Posted March 21 Author Share #7 Posted March 21 Advertisement (gone after registration) Thank you for all your answers. Link to post Share on other sites More sharing options...
3D-Kraft.com Posted March 24 Share #8 Posted March 24 If you want to be able to shoot at f/1.4 in bright sun light, you need at least a ND8 (0.9) 3-stops filter in order to not exceed the 1/4000s limit of the M9 shutter. I recommend filters with good coating like those from B+W. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now