des hill Posted December 4, 2023 Share #1 Posted December 4, 2023 Advertisement (gone after registration) I've been using the M11M with Visoflex2 happily, with grid and level for some time. More recently they have just vanished from the screen, and no amount of menu hunting can reinstate them. I'm sure I've not inadvertantly removed them. I have just updated to 2.0.2 firmware with no effect. Has anyone come across this? Link to post Share on other sites More sharing options...
Advertisement Posted December 4, 2023 Posted December 4, 2023 Hi des hill, Take a look here M11M with Visoflex2 - vnishing grid. I'm sure you'll find what you were looking for!
kona Posted December 4, 2023 Share #2 Posted December 4, 2023 (edited) Still there on my M11 (not M11M) with 2.0.2. You have to dig quite deep into the menu to find it: Menu Page 4 -> Capture Assistants -> Info Profiles -> Info Profile #x -> Grids Edited December 4, 2023 by kona Link to post Share on other sites More sharing options...
des hill Posted December 4, 2023 Author Share #3 Posted December 4, 2023 thanks for reply, yes, quite deep, too deep to 'accidentally' cancel anything. So I've tried to set up a profile with grids 'switched on' to no avail, unfortunately. Will have another try later though. Link to post Share on other sites More sharing options...
kona Posted December 4, 2023 Share #4 Posted December 4, 2023 Profiles can get wiped out during firmware update unless you select to save them. But I didn't quite understand, are you saying that you changed the setting and still don't see the grid? Link to post Share on other sites More sharing options...
J S H Posted December 4, 2023 Share #5 Posted December 4, 2023 4 minutes ago, des hill said: thanks for reply, yes, quite deep, too deep to 'accidentally' cancel anything. So I've tried to set up a profile with grids 'switched on' to no avail, unfortunately. Will have another try later though. Also, keep in mind that you need to push the center button to cycle through the info pages. I think by default, one is a blank screen, devoid of any capture assistants. You may be viewing that one? Link to post Share on other sites More sharing options...
bcaslis Posted December 4, 2023 Share #6 Posted December 4, 2023 Just tried with M11M, visoflex 2, and FW v2.0.2. The grids are still there if you turn them on. Link to post Share on other sites More sharing options...
des hill Posted December 5, 2023 Author Share #7 Posted December 5, 2023 Advertisement (gone after registration) Yes, and as far as i can see, i have. Profile#1 shows on the menu home screen as being in use. Welcome, dear visitor! As registered member you'd see an image here… Simply register for free here – We are always happy to welcome new members! Link to post Share on other sites Simply register for free here – We are always happy to welcome new members! ' data-webShareUrl='https://www.l-camera-forum.com/topic/385508-m11m-with-visoflex2-vnishing-grid/?do=findComment&comment=4931371'>More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now