blovitch Posted August 14, 2006 Share #1 Posted August 14, 2006 Advertisement (gone after registration) Does anyone have any experience of "patching" the shutter on M Type cameras. I have managed to burn a hole in the shutter on my M6 TTL Black Paint. Many thanks. -Tim Link to post Share on other sites More sharing options...
Advertisement Posted August 14, 2006 Posted August 14, 2006 Hi blovitch, Take a look here Shutter Damage. I'm sure you'll find what you were looking for!
bill Posted August 14, 2006 Share #2 Posted August 14, 2006 I wouldn't try darning it Tim. Sounds like a factory repair job to me. That's a precision bit of kit, after all. Regards, Bill Link to post Share on other sites More sharing options...
wizard Posted August 14, 2006 Share #3 Posted August 14, 2006 Agree with Bill. Do not try to patch it, but have new shutter curtains installed by Leica. Patching means locally changing the thickness of the curtains, which will negatively affect the operation of the shutter. Andy Link to post Share on other sites More sharing options...
blovitch Posted August 14, 2006 Author Share #4 Posted August 14, 2006 Thanks for the advice. The patches were offered by an established Leica Repair person... They are self adhesive and appear to be made of a similar material. I must confess to being sceptical myself (hence my post), but I am assured many such patches are in user on M cameras. On a seperate note I can't believe how quickly it happened, we were sat outside a cafe. I took two exposures, the first one is fine. The next one in the sequence just a few moments later shows the evidence of the damage. -TIm Link to post Share on other sites More sharing options...
Guest leica_mage Posted August 14, 2006 Share #5 Posted August 14, 2006 Tim, bloody Hell! I'm sorry. We must all remember that this is a constant threat. Don't fall for the band-aid thing, get it fixed properly - and never again leave your wonderful camera in the sun like that!... Very best regards, Link to post Share on other sites More sharing options...
albertwang Posted August 14, 2006 Share #6 Posted August 14, 2006 You need to need back to Leica USA or Sherry to get repaired. Patching won't work because the shutter timing mech will go outta sync. That is unless you prefer a Holga-ca instead. Link to post Share on other sites More sharing options...
earleygallery Posted August 14, 2006 Share #7 Posted August 14, 2006 Advertisement (gone after registration) Bilmey! I'd be worried about the elastoplast coming off in the camera at some point and totally jamming the shutter. Another point in favour of the M8? Mind you my lllf is 52 years old and still on the original shutter curtains. Link to post Share on other sites More sharing options...
hrosell Posted August 15, 2006 Share #8 Posted August 15, 2006 On a seperate note I can't believe how quickly it happened, we were sat outside a cafe. I took two exposures, the first one is fine. The next one in the sequence just a few moments later shows the evidence of the damage. Tim, although this might be obvious to most of M users, I heard from a friend that the curtain on his M6 was holed by leaving the camera on the seat of a car with the lens up for quite a short period, the sun dangerously shining on it. It also seems that he had either a 35 or 50mm lens on, focused at infinity at the time of the incident. I am sorry for you, but wold suggest to have the curtain substituted by Leica. Why taking any risk with such a nice –and expensive– camera? Link to post Share on other sites More sharing options...
georg Posted August 15, 2006 Share #9 Posted August 15, 2006 I also burned a hole into my shutter during vacation in NYC. With a fast lens, accidently focused on the right distance (not infinity, the shutter is 2-3mm in front of the film) the sun needs only a few seconds to burn a hole into it. I've "repaired" it with ordinary black tape, it works pretty well but isn't a long-term solution of course - but what would you do during vacation? You need to send it to Leica, it costs about 350€ (they need to disassemble most of the camera), including maintenance. Now I try to close the aperture every time I don't take a picture, you just need to get used to it. Link to post Share on other sites More sharing options...
blovitch Posted August 16, 2006 Author Share #10 Posted August 16, 2006 Thanks for all the advice gents. Its going to be a month or so before anyone can look at the M6. I have chalked this up to experience, and don't intend to let it happen again. Chatting to various people made me feel a little better, it is surprisingly common. Cheers. -Tim Link to post Share on other sites More sharing options...
lincoln_m Posted August 16, 2006 Share #11 Posted August 16, 2006 Hi, Thanks for the warning about this. I remember hearing about this possibility about a year or so ago and bought a lens cap for my 35mm f2 and made sure I use the lens cap on my 50mm f2 also. It reminds me of paper and a magnifying glass as a kid. You'd need to have the lens pointing at the sun but I guess at full aperture it can happen. This also reminds me why it is best to have 2 M bodies incase one has to be fixed. I agree with others that a return for new curtain and service is probably the best assuming you can part with your M6TTL. Regards, Lincoln Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.