Jump to content

Are Sandisk SD cards safe for use with DMR ?


surgiblade

Recommended Posts

Advertisement (gone after registration)

Just got the DMR in the mail- am charging battery- noted instructions that wrong SD cards could damage DMR- LAST THING ON EARTH I WOULD WANT -

so- are SanDisk SD cards safe ? Which ones are unsafe ?

 

Also noted peculiar connection at end of firewire- definitely NOT- USB- how do you connect to computer ??

 

I await a reply to begin my learning curve.

 

Mike

Link to post
Share on other sites

Mike:

 

The DMR originally shipped with the Sandisk Ultra II cards. I use the 2gb Ultra II cards, along with some Transcend 150x 2gb cards without any problems. The new firmware may allow the use of the 4gb cards which are not SDHC.

 

The DMR uses firewire to tether to the PC. If you do not have firewire on your PC, a firewire card can be bought quite cheap. I have one in my desktop and use a PCMCIA firewire card for the Laptop.

 

After SD cards, a second battery should be on your list of things to buy. The DMR battery isn't that big and will not last a day of shooting.

Link to post
Share on other sites

I would recommend using an external card reader, rather than the firewire connection. The socket looks expensive to repair if it gets damaged...

 

I bought a second battery for mine, but I get over 300 shots, with review screen, out of one battery. 2 weekends ago, I shot 500 frames, with loads of juice left in the second battery.

Link to post
Share on other sites

Andy - I struggle to get 100 shots (full RAW) from one battery - with review on , and the sleep setting at 2 mins. The best I got was 150 from a 3rd new battery bought a couple of months ago (the other 2 are 2 years old now and have been recharged about 50 times). What's the secret?

 

I use Sandisk Ultra 11 and Ultra 111 (2GB) - no trouble - but never let the battery discahrge to the point when it shuts the camera down - you can lose images that way and have to use recovery software to get them back.

 

Graeme

Link to post
Share on other sites

Guest rubidium

I too use Transcend 4GB 150x SD cards with no problem. They worked fine with firmware 1.2 and they continue to work fine with firmware 1.3. I also get 201 RAW images on this card.

Jim

Link to post
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...