Fotos 2.2.2 and 2.2.2 Pro released

[scott kirkpatrick]

Advertisement (gone after registration)

Still no fees. Thanks, Leica! 

Some bugfixes claimed, but I could still find bugs, and some may be new.

I am running Fotos Pro 2.2.2 in an iPad Pro with IOS 14.1   Camera is SL2 with about 900 pictures on card #1.  (second card still not recognized, warning message.)

Connection first time using pairing was clean.  I had wiped off old copy of Fotos 2.2.1 (plain, not Pro).  Connecting for the second time after shutting down was hard., took several tries.

Fotos came up with its own set of Aperture, Shutter, ISO, Fstop settings, not those on the camera.  I set them to my needs, took some shots, switched to video.  Video came up with its own settings, which I adjusted. Shot a short video.  Switched back to photo.  Aperture and Iso were as I had left them, but the shutter speed was still set as video had left it.  That's BAD.  Camera firmware has them nicely kept independent .

Video start and stop were reasonably quick.  Setting drive to continuous low speed still doesn't work (you get a single shot)

Some apertures are still reported wrong (2.1, 4.1, 3.6  etc.)

 

(edit) current Android Fotos is still 2.2.0, so not relevant to this thread. 

  

 

Edited November 4, 2020 by scott kirkpatrick