hofo100 Posted August 12, 2020 Share #1 Posted August 12, 2020 Advertisement (gone after registration) Not sure if this has happened to anybody else - today, out of the blue, my SL2's firmware (2.0) crashed - I did not do anything unusual so I do not know what the trigger was, but it happened when I wanted to format my SD card. Although the camera continued to operate and I was able to shoot (and the exposures etc. looked right) I first realized that when turning off, the red dot on the LCD did not show "Leica" but a big "!". I then noticed that some of the menu lines changed language back from German to English (but not all) and some were shifted to the right (looked weird...). Turning on/off and removing batteries etc. did not help. I was also unable to access my user profiles (this was one part which was shifted to the right + language changed) and my presets were all gone - it looked like a brand new camera. In order to resolve the issue, I had to reset the camera (twice, since the first re-setting process just increased the language Desaster in the menu...). After second reset and until know everything works again as it should (that's the good news) but all my user profiles were gone (that's the bad news, as I had personalized the camera with these profiles very much...) So, what I have done know and would recommend to other SL2 users - after manually recreating the first user profiles I have exported them and saved them externally, so that I can re-import them if something like this ever happens again. best regards, Holger Link to post Share on other sites More sharing options...
Advertisement Posted August 12, 2020 Posted August 12, 2020 Hi hofo100, Take a look here SL2 firmware crash - better save your user profiles.... I'm sure you'll find what you were looking for!
hofo100 Posted August 12, 2020 Author Share #2 Posted August 12, 2020 Edit - might have found the reason for that crash - a mechanical damage of the SD card - see photo - Lesson learned #2 - inspect SD cards from time to time;) Welcome, dear visitor! As registered member you'd see an image here… Simply register for free here – We are always happy to welcome new members! 4 1 Link to post Share on other sites Simply register for free here – We are always happy to welcome new members! ' data-webShareUrl='https://www.l-camera-forum.com/topic/312233-sl2-firmware-crash-better-save-your-user-profiles/?do=findComment&comment=4025917'>More sharing options...
hoppyman Posted August 12, 2020 Share #3 Posted August 12, 2020 Ouch! I hope that has proven to be the issue for you and it’s fully resolved. Thanks for sharing what you encountered here as well. Link to post Share on other sites More sharing options...
Joakim Posted August 13, 2020 Share #4 Posted August 13, 2020 Thanks for sharing, I haven’t had my SL2 so long but creating a user profile and back it up sounds like something I should do immediately so I don’t have to start over in case something happens. Link to post Share on other sites More sharing options...
WeiterWinkel Posted August 13, 2020 Share #5 Posted August 13, 2020 I have to remind me always exporting my user profiles after formatting the card .... Link to post Share on other sites More sharing options...
caissa Posted August 17, 2020 Share #6 Posted August 17, 2020 I save the file to the PC/Mac (several copies on several disks). Then nothing can happen. No need to recreate it after formatting. Or simply save it on a older smaller SDcard that is not in use anymore. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now