Jump to content

Recommended Posts

Advertisement (gone after registration)

Just got my 7Artisans 55m 1.4 L mount lens today. It's a nice looking chunky bit of kit, and arrived just in time for my holiday today so hopefully I will get some use out of it. 

I wondered, is there a way with manual lenses of getting the T to zoom in to check focus? I thought I'd seen it somewhere but can't seem to find out how to do it?

I'll try and do a review of the lens when I've had some experience with it.

TIA

Karl

PS test shot at ISO 2000, 1/100, f5.6 attached

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

Link to post
Share on other sites

Tried another shot, my eyes were directly into the sun and focusing with the screen was pretty tough!

I've got the Visoflex on order 🙂

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

  • Like 1
Link to post
Share on other sites

And this is what it looks like mounted.

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

Link to post
Share on other sites

Advertisement (gone after registration)

I am using Nikkor lenses via an adapter and magnification does work. It is a little tricky to set it up right, but it does work! :)

After each firmware, I always take much time to set it up and I always forget how to do it! lol

Edited by Louis
  • Like 1
Link to post
Share on other sites

The camera needs to be switched to aperture priority mode. Spin the left wheel. The symbols for setting the wheel function will appear on the screen. Factory setting is ISO. Click on it and select the focus mode item. After that, when shooting, you can turn the left wheel. Works with any adapters.

From user manual:

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

  • Like 2
Link to post
Share on other sites

  • 6 years later...

Hi I just bought a Leica T and all seems fine and will take a picture with no lens (but obviously it's white) but I just wanted to check it worked at all. However when I connect my new TT Artisan L mount the screen is totally different black. I have set in Aperture Priority mode, manual and all modes. It will not take a picture and the screen totally black. The aperture opens perfectly on the lens itself but screen still black. What am I doing wrong?

  • Like 1
Link to post
Share on other sites

  • 4 weeks later...

I'm no techie - but on my TL2 with el-cheapo Chineasium adapters - about every fifth lens change I will get NOTHING on the screen or the EVF (VisoFlex).  I simply unmount and remount (just press the release button and rotate the lens and then re-engage (without lifting the lens/adapter off the mount) - and it always works.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...