woodda Posted July 21, 2007 Share #1 Posted July 21, 2007 Advertisement (gone after registration) Any suggestions, I have noticed that when the image first comes up in preview on the back it is cool and natural. Then .5 sec later it changes and seems to have been coloured and or colour adjusted. Is this normal as I have not notice the image changing just after displaying, PS only shooting RAW and tried taking off IT and 6BIT in menu it still changes Thanks in advance Link to post Share on other sites More sharing options...
Advertisement Posted July 21, 2007 Posted July 21, 2007 Hi woodda, Take a look here Raw image changes colour after inital preview. I'm sure you'll find what you were looking for!
stunsworth Posted July 21, 2007 Share #2 Posted July 21, 2007 It's normal. The camera seems to be applying colour correction. If you shoot with an IR/UV filter you'll see the initial image has cyan corners, this then changes to a correct image. With the Noctilux you can also see that it's compensating for the lens's inherent vignetting. Link to post Share on other sites More sharing options...
woodda Posted July 21, 2007 Author Share #3 Posted July 21, 2007 Cheers. Just not noticed it prior to camera going back to Solms for new top and 6 bit and range finder calibration Link to post Share on other sites More sharing options...
rvaubel Posted July 21, 2007 Share #4 Posted July 21, 2007 You might notice the noise level going way up at high ISO. It goes up to intolerable levels but the actually files don't look anyway near that bad. Can anyone explain? Rex Link to post Share on other sites More sharing options...
MP3 Posted July 22, 2007 Share #5 Posted July 22, 2007 Cheers. Just not noticed it prior to camera going back to Solms for new top and 6 bit and range finder calibration Hi Darrell, for the new top of your M8, are you changing black top to chrome top or vice versa? Link to post Share on other sites More sharing options...
lars_bergquist Posted July 22, 2007 Share #6 Posted July 22, 2007 You might notice the noise level going way up at high ISO. It goes up to intolerable levels but the actually files don't look anyway near that bad. Can anyone explain? Rex The ten megapixel image is shown on a very small monitor with a small number of pixels. This may well be the cause of the coarser rendering of the grain. But no matter – the proof of the image is in the eating, and noise levels are acceptable at high iSOs, especially in BW and at ISO 1250. And Tri-X was not exactly grainless, either ... The old man from the Age of D-72 Link to post Share on other sites More sharing options...
carstenw Posted July 22, 2007 Share #7 Posted July 22, 2007 Advertisement (gone after registration) I have a feeling that the image is either not downsampled for the display on the screen, or only with a crude algorithm. If the algorithm just choose the nearest pixel in the full image, then the noise might well seem stronger on the screen. Link to post Share on other sites More sharing options...
vanhulsenbeek Posted July 22, 2007 Share #8 Posted July 22, 2007 Any suggestions, I have noticed that when the image first comes up in preview on the back it is cool and natural. Then .5 sec later it changes and seems to have been coloured and or colour adjusted. Interesting: I notice it, ever so shortly, when M8 DNG's (UV/IR on plus filter) are imported into Lightroom (1.1). Noticeable green cast, strong in corners, then going away, and image also adjusting in height. Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.