Jump to content

Help: SL stopped working!


MEB

Recommended Posts

Advertisement (gone after registration)

Over the last 3 days I have shot over 400 pictures.  Everything worked perfectly.  This morning I went to take a shot.  The camera autofocused perfectly and everything appeared normal until I went to shoot the picture then nothing...no shutter and the camera just ignored me.  I tried shutting it off several times and taking out the battery several times.  The battery is fully charged and the camera recognizes the discs in the camera.  I had the SL 24-90 lens attached but the same result when I mounted the M50 lux with the adaptor.

 

Anyone experienced this?  Is there something I should be trying?

 

Thanks,

 

Mark

Link to post
Share on other sites

Ok,  I fixed it.  I had to "Reset" the camera.  I have no idea what happened but after the reset it is now working.

 

Mark

Link to post
Share on other sites

The next time it happens do this: look at the top of the LCD (or EVF). Do you see the icon of a microphone and two volume bars to the right of it? If so, the camera is in video mode and won't respond to the shutter release.  Give the LV button a short press to return to photograph mode.

 

With my new SL the problem happened a couple of times before I became deliberate about the difference between short presses and long presses of the buttons.

 

dgktkr

Link to post
Share on other sites

dgktkr

Thank you.  I think you are correct about what was happening except that I could not get the camera to come out of video mode.  The only way I could get back control over the shutter was to reset the whole system.

 

Mark

Link to post
Share on other sites

Same experience for me ... I have not understand.

Anyway, my video mode is blocked in the menu.

 

 

Hugues33,

 

Could you elaborate? Your SL is in video mode and a short press of the LV button doesn't return it to photograph mode?

 

dgktkr

Link to post
Share on other sites

Advertisement (gone after registration)

Hugues33

 

That is correct.  It is now working correctly.  A short push does disengage the video mode.  Before I reset the camera, however, it did not reset.

 

Now all is working correctly.

 

Mark

Link to post
Share on other sites

I am french and my english is poor.

IN the setup, i have blocked the video button inoperate.

But, one day, i have start the SL and i have not see it is in video mode. I cannot stop it, i have put out the battery to reset.

Link to post
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...