Ario Arioldi Posted November 16, 2015 Share #1 Posted November 16, 2015 Advertisement (gone after registration) Is there any way to override the information from the T-M adapter and manually select the lens? For some reason I am getting some wrong reading from the adapter: an uncoded Noctilux is recognized as a 90mm and I have seen no way to change this. My Novoflex coded R-M adapter is recognized as an M lens (I have the choice to select between 135mm and 90mm M lens) and again I have found no way to change this. I hope a FW will take care, unless there is already a workaround I am not aware of. Link to post Share on other sites More sharing options...
Advertisement Posted November 16, 2015 Posted November 16, 2015 Hi Ario Arioldi, Take a look here False info from the adapter. I'm sure you'll find what you were looking for!
jonoslack Posted November 16, 2015 Share #2 Posted November 16, 2015 HI Ario I don't think there is a way of over-riding a read 6 bit code (whether right or wrong) As a first step I'd suggest cleaning the T adapter and mount (does that make a difference) Is it picking up the correct code from any lenses? Is the Novoflex adapter properly coded (some of their codes were off-kilter I think). Link to post Share on other sites More sharing options...
Ario Arioldi Posted November 16, 2015 Author Share #3 Posted November 16, 2015 Hi Jono, I cleaned everithing, to no avail. I only had problems with the Novoflex adapter and with the uncoded Noctilux, other coded lenses I have used works as expected The Novoflex R-M coded adapter work perfectly with the Leica M 240 Probably the sensitivity of the reader on the adapter is different from the one on the M 240, but I think that in any case a way to override wrong readings is a a useful addition, probably not too difficult to implement. Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.