Bjorkman Posted December 17, 2014 Share #1 Posted December 17, 2014 Advertisement (gone after registration) I'm new too Leica and trying too get my elinchrom flash/strobe too fire with my M6TTL I've tried both the pc cord input on the back and a adapter on top using shutter speeds slower than 50/1. But the elinchrom doesnt react, I've tired the adapter, the pc cord and the elinchrom with good results on another camera. Any ideas? Link to post Share on other sites More sharing options...
Advertisement Posted December 17, 2014 Posted December 17, 2014 Hi Bjorkman, Take a look here M6 ttl pc cord. I'm sure you'll find what you were looking for!
too old to care Posted December 20, 2014 Share #2 Posted December 20, 2014 I'm new too Leica and trying too get my elinchrom flash/strobe too fire with my M6TTL I've tried both the pc cord input on the back and a adapter on top using shutter speeds slower than 50/1. But the elinchrom doesnt react, I've tired the adapter, the pc cord and the elinchrom with good results on another camera. Any ideas? Only idea that I have is to make sure your camera's batteries are ok. The camera will not fire if they are low or missing. The TTL circuit needs them, unlike other non TTL M6's. Link to post Share on other sites More sharing options...
madNbad Posted December 20, 2014 Share #3 Posted December 20, 2014 Check the batteries and make shure the shutter speed dial is set to the flash indicator. Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.