jackperk Posted September 23, 2014 Share #1 Posted September 23, 2014 Advertisement (gone after registration) Does it work for anyone? Have tried it on iPhone and iPad and can get no response. Am told every time there is no camera on my wifi site though the camera says it is. There being no way to get any guidance from the app, I turn hopefully to you good folks. Link to post Share on other sites More sharing options...
Advertisement Posted September 23, 2014 Posted September 23, 2014 Hi jackperk, Take a look here The Leica T app --. I'm sure you'll find what you were looking for!
Paul925 Posted September 23, 2014 Share #2 Posted September 23, 2014 Yes, I've found it to work quite well. If you've not already done so, I recommend ensuring you're running firmware 1.2. Then, I'd suggest watching this video from the Leica Store Miami on this subject, which I found to be helpful. Hope this helps! Paul Link to post Share on other sites More sharing options...
jackperk Posted September 23, 2014 Author Share #3 Posted September 23, 2014 Unfortunately, it still does not work AT ALL. I'm using firmware 1.2. The app however when started and camera is already connected to my wifi just supine declaring that there is no camera on that same wifi. Very frustrating. I checked David's video you cited. Quite good but doesn't address my problem at all. Any other ideas anyone. .??? TIA Link to post Share on other sites More sharing options...
Guest Posted September 24, 2014 Share #4 Posted September 24, 2014 The app usually works well for me. I connect to my iphone via personal hotspot (with wifi "on"). If I run into a connection problem (which sometimes does happen on the 1st try), I double click my iPhone's home button to close the Leica app (by swiping up on it), and then relaunch the Leica app. It should work when you load it fresh. It does for me anyway. Good luck, and enjoy! Cheers DGP Link to post Share on other sites More sharing options...
Guest Posted September 24, 2014 Share #5 Posted September 24, 2014 By the way, I launch the app AFTER I successfully connect the camera to my personal hotspot. I don't think it works if you launch the app first. Link to post Share on other sites More sharing options...
jonoslack Posted September 24, 2014 Share #6 Posted September 24, 2014 HI There - there is stuff about this in the FAQ: FAQ thread Link to post Share on other sites More sharing options...
Peter L Posted September 24, 2014 Share #7 Posted September 24, 2014 Advertisement (gone after registration) HI There - there is stuff about this in the FAQ: FAQ thread Does not work with LAN and iPad , specific instructions would helpful. Link to post Share on other sites More sharing options...
Peter L Posted September 24, 2014 Share #8 Posted September 24, 2014 O.K. tried again , camera wifi icon shows checkmark with 4 bars signal strength. the T app on the iPad shows the camera's serial number and is red, it indicates "tap to connect" I tap, and a message comes up "connection error, the camera is busy" Any advise ? anyone Thanks Peter If one pays this much for a camera , it should work, even though this is not a major feature. computers have been around for a long time now , myself , I used (also programmed) unix and microsoft mostly scientific applications (geophysics) for the past 35 years, sure , we had problems at times , but notstupid little ones, today connectivity is not so complicated, Link to post Share on other sites More sharing options...
IkarusJohn Posted September 25, 2014 Share #9 Posted September 25, 2014 Sounds like you're trying to connect to the camera through the wifi connection in Settings? Forgive me if I've misunderstood, but if your camera is connected to the wifi network, and your phone or iPad is also connected to the same network, if you then open the T App on your phone or iPad, and then tap on the Orange disk, the connection should e established. Link to post Share on other sites More sharing options...
Peter L Posted September 25, 2014 Share #10 Posted September 25, 2014 Sounds like you're trying to connect to the camera through the wifi connection in Settings? Forgive me if I've misunderstood, but if your camera is connected to the wifi network, and your phone or iPad is also connected to the same network, if you then open the T App on your phone or iPad, and then tap on the Orange disk, the connection should e established. I f you read my post , you'll see that is exactly what I am doiing, however, the message In th orange disk is " connection error, camera is busy" , the Orange disk does display the Camera' s serial number Link to post Share on other sites More sharing options...
jonoslack Posted September 25, 2014 Share #11 Posted September 25, 2014 Have you tried to restart both the camera and the iPad? I had to do that before it worked the first time. . . . . also, Have you tried it with a personal hotspot on your iPad (probably more useful as you're more likely to use it away from home) Link to post Share on other sites More sharing options...
Peter L Posted September 25, 2014 Share #12 Posted September 25, 2014 Have you tried to restart both the camera and the iPad?I had to do that before it worked the first time. . . . . also, Have you tried it with a personal hotspot on your iPad (probably more useful as you're more likely to use it away from home) I did restart the camera and the app several times, also deleted the app and downloaded it again. I'll try your suggestion , hotspot on iPad, Thanks Peter Link to post Share on other sites More sharing options...
IkarusJohn Posted September 25, 2014 Share #13 Posted September 25, 2014 I f you read my post , you'll see that is exactly what I am doiing, however, the message In th orange disk is " connection error, camera is busy" , the Orange disk does display the Camera' s serial number My apologies, I was just trying to help. I had read your post, but I was trying to understand what might be going wrong for you. The easiest solution is actually to see what you're doing as no one else had has this problem. If you're doing everything right, then your camera must be faulty. Link to post Share on other sites More sharing options...
Peter L Posted September 25, 2014 Share #14 Posted September 25, 2014 My apologies, I was just trying to help. I had read your post, but I was trying to understand what might be going wrong for you. The easiest solution is actually to see what you're doing as no one else had has this problem. If you're doing everything right, then your camera must be faulty. No need at all to apologize and I do appreciate your efforts trying to help me. I am suspecting a bug in the cameras software or some incompatibility with my network The app does read the camera's serial number , so communication was established from there the app shows a message " communication error- camera busy ", this obviously has been programmed in to the app's code, so the programmer anticipated a situation like this, whatever that situation may be. It is annoying, but no biggie, I was just trying to see how I might use this, I do not anticipate to use this a lot, if I ever do get it to work, I mostly transfer images from the SD card on to My MacBookPro . I see this app only as a pre-view method. The Camera itself is outstanding in every other aspect. Thanks again for you effort Peter Link to post Share on other sites More sharing options...
pico Posted September 25, 2014 Share #15 Posted September 25, 2014 No need at all to apologize and I do appreciate your efforts trying to help me.I am suspecting a bug in the cameras software or some incompatibility with my network Just a thought - you do not require a network to connect to the camera. All you need is a connection between your device (iphone, ipad, and so-forth.) Go for a short walk away from your home and try again. . Link to post Share on other sites More sharing options...
AlanJW Posted September 28, 2014 Share #16 Posted September 28, 2014 Just a thought - you do not require a network to connect to the camera. All you need is a connection between your device (iphone, ipad, and so-forth.) Go for a short walk away from your home and try again. . Unfortunately, this is not true for all devices. Your carrier data plan must allow setting up a hotspot. My iPhone does not permit this but my iPad does. The data on the iPhone is paid for by someone else (the firm I retired from) and they haven't included hotspotting. The iPad is soley paid for my me, so I can do it. I don't know how much data is used up by a session between the iPad and the Leica T, and I think it prudent if you're going to do a lot of wifi tethered shooting to figure that out so you don't get hit with the exhorbitant fees most carriers charge when you go over your limit. Link to post Share on other sites More sharing options...
pico Posted September 28, 2014 Share #17 Posted September 28, 2014 Unfortunately, this is not true for all devices. Your carrier data plan must allow setting up a hotspot. My iPhone does not permit this but my iPad does. You must be right. I got a personal hot-spot to come up on my iPhone 4S with iOS 8+, and it gave me the password to share with other devices to use my iPhone via WiFi, Bluetooth and USB, then I turned it on but it blanked out after a couple minutes after I found it on my network. But by the time I found my iPhone on my Air, the network connection became dead. Maybe cellular dialed home to Verison and shut me out. It ain't right! Screen shot here: Link to post Share on other sites More sharing options...
Jhlo5588 Posted October 12, 2014 Share #18 Posted October 12, 2014 One major complaint about the app is that you can't download all photos in a day or make multiple selections. Instead transferring to ipad iPhone is simply tedious, go into a pic, then select import. Apps for much cheaper cameras does way better job. Link to post Share on other sites More sharing options...
IkarusJohn Posted October 12, 2014 Share #19 Posted October 12, 2014 For post processing, I either use a USB cable or I take out the SD card - it's far more reliable and faster. When traveling, I tend to store the images on the SD cards, and just review them on my iPad or MacBook Air using an SD card reader. I don't mind the brief review you get through the App, but I tend to use it more for remote camera control. Link to post Share on other sites More sharing options...
alexander Posted October 14, 2014 Share #20 Posted October 14, 2014 it is still not working perfect... if you walk more than 2 meters away fron the T with you iPhone it will lose the connection......... so it is more or less useless as a remote control... Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.