50/F1 V4 & 50/0.95 with A7R issue BANDING

[HKFEVER]

Advertisement (gone after registration)

Wonder anyone use this combination to shoot indoor under multi light sources ( Light from: LCD Monitor, Fluorescent tube with different temp.,....)?

 

Here is what I experiencing:

- There has couple thick orange bands rolling from top to bottom slowly in LV.

- Those bars show up in pictures.

- Leica 50/F1 V4 is more serious, but not much compare to 50/0.95.

- Canon 0.95 is OK.

- Leica 50/2 is OK.

 

The following shows in LV:

http://www.pbase.com/hkfever/image/156152189/original.jpg

http://www.pbase.com/hkfever/image/156152190/original.jpg

http://www.pbase.com/hkfever/image/156152192/original.jpg

 

 

The following shows in pictures

http://www.pbase.com/hkfever/image/156149918/large.jpg

http://www.pbase.com/hkfever/image/156149921/large.jpg

http://www.pbase.com/hkfever/image/156152029/large.jpg

http://www.pbase.com/hkfever/image/156152031/large.jpg

http://www.pbase.com/hkfever/image/156152030/large.jpg

[Advertisement]

The Leica Q3 is available for pre-order at B&H Photo Video and Adorama

[jaapv]

Either a light problem (Fluorescent is discontinuous and cycles at 50 Hz) Or a camera problem, or a conbination of both. Hard to see what the lens has to do with it.

[HKFEVER]

This attached file is around 1.7MB compressed:

- All the original files ( no PS, only converted to JPG by PS ) were shrinked to 8" width

- Then pasted in AI and then shrink to 33% ( because the file is over 350Mb )

- Then save as web in High only.

 

I found M240 handle the colour and the banding or the light much much better than the A7 & A7r

 

http://www.pbase.com/hkfever/image/156163648/original.jpg