canlogic Posted April 29, 2007 Share #1 Posted April 29, 2007 Advertisement (gone after registration) -------------------------------------------------------------------------------- I have read over time the different problems with the batteries but haven't seen this one yet. Sometimes but not always my meter will never change from a full charge, the camera just dies and I have to change the battery. Usually it will happen if I use the camera lightly over a few days or a week. I may take 100 shots one day then not use it for a day or 2 then take 20 or 30 then not use it for a day etc etc. This is the scenario I just went through and the indicator just kept showing full. yesterday I take it out for a shot, took 1 then nothing camera dead. No other problems, no lockups etc just this. Anyone else seen this. Link to post Share on other sites More sharing options...
Advertisement Posted April 29, 2007 Posted April 29, 2007 Hi canlogic, Take a look here A different battery problem.. I'm sure you'll find what you were looking for!
brucek Posted April 30, 2007 Share #2 Posted April 30, 2007 Yes, I ran into the same problem last week. Same scenario, too (same battery sitting in the camera for a while with minimal use). Three bars to shut down inside of 5 minutes. The battery appeared to charge okay but we'll see... FWIW this problem occurred with firmware V1.102; I don't recall seeing it happen with earlier firmware versions. Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.