ChrNil49 Posted January 15, 2013 Share #1 Posted January 15, 2013 Advertisement (gone after registration) Hope someone can help me. I have a SF 24 mounted on my M6TTL and no matter what I do I can't seem to trip the flash. Yes, it's turned on, yes the shutter speed is lower than 1/50th. I have tried to trip it in all 3 modes, i.e. TTL, A and M. Nothing happens. I can trip it by pushing the button on the flash. The flash icon shows in the viewfinder. What am I doing wrong?? Link to post Share on other sites More sharing options...
Advertisement Posted January 15, 2013 Posted January 15, 2013 Hi ChrNil49, Take a look here HELP! Issue with tripping the flash.. I'm sure you'll find what you were looking for!
ChrNil49 Posted January 15, 2013 Author Share #2 Posted January 15, 2013 OK light does not light up at any setting. Link to post Share on other sites More sharing options...
ChrNil49 Posted January 15, 2013 Author Share #3 Posted January 15, 2013 Having a conversation with myself, but I went to the shop and the flash works, so I guess my hot shoe is bust. Link to post Share on other sites More sharing options...
madNbad Posted January 15, 2013 Share #4 Posted January 15, 2013 Did you try it with the shutter speed set to the lightning bolt? That is the dedicated flash setting for the TTL. Good Luck. Link to post Share on other sites More sharing options...
too old to care Posted January 15, 2013 Share #5 Posted January 15, 2013 Make sure your camera battery is ok, the M6TTL will not fire the flash if it is bad. Do not ask me how I discovered that fact. Wayne Link to post Share on other sites More sharing options...
ChrNil49 Posted January 16, 2013 Author Share #6 Posted January 16, 2013 Did you try it with the shutter speed set to the lightning bolt? That is the dedicated flash setting for the TTL. Good Luck. Yes, thank you, tried all speeds of 1/50th (lightning bolt) and slower. Link to post Share on other sites More sharing options...
thrid Posted January 16, 2013 Share #7 Posted January 16, 2013 Advertisement (gone after registration) Check the battery in the camera. If it is low or dead TTL won't work. Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.