whats wrong ...:(

[andym911]

Advertisement (gone after registration)

My view..

1.White spots are only related to cleanliness in the dev and drying process of your negs..

Make sure that where you hang the film to dry is dust free....bathrooms are pretty good and do not dry film in a room with a window open of a circulation of air.

 

2.Focussing problem may be shutter speed problem..or camera shake.Are you sure it is focussing?

 

I suggest to check that before getting disappointed....

 

over the years I have learnt to accept that I cannot shoot slower than 1/125 and get good sharp results..some people can but I can't.

 

If some of your images are sharp and others not then it is user error.

 

good luck and don't give up!

 

andy

[M6Mann]

This looks like dust on the negative at the scanning stage. Cleaning the negative, not just brushing, before you scan should help.

[pico]

This looks like dust on the negative at the scanning stage. Cleaning the negative, not just brushing, before you scan should help.

 

For the enthusiast there is the Senrac film dryer. It dries the film while it is on the reel. Stainless reels preferred. If you get one it will be used. Replace the air filter material with commonly available humidifier foam - use two layers. I've used the Senrac for decades with very good results.

[250swb]

HI Steve, now read this for CMS 20.

 

http://www.adox.de/CMS20_ADOTECHII_instructions.pdf

 

For cms One must use stop bath

 

Interesting, isn't it?

 

Franco

 

As the OP's description has wavered between 25 CMS (CHS???) and 20 CMS I guess we may never know. But his processing flaws happened on both film types using a stop bath, and one of those for sure says 'no'. So the logic says roll everything back and start again, not argue the toss.

 

Steve