wilfredo Posted July 28, 2010 Share #1 Posted July 28, 2010 Advertisement (gone after registration) I installed the Capture I software that came with my M8 on my IMAC. Every time I try to use it I get a message that says "The Application Leica Digital Capture quit unexpectantly." Never had this problem with my PC. Can anyone explain what the problem might be? Thanks Link to post Share on other sites More sharing options...
Advertisement Posted July 28, 2010 Posted July 28, 2010 Hi wilfredo, Take a look here Capture I and IMACS. I'm sure you'll find what you were looking for!
Westerwald-Leica Posted July 28, 2010 Share #2 Posted July 28, 2010 Hi Wilfredo, I have upgraded to version capture 1 pro 5.1 something. Runs like a charm. You might try a re-install or check if there is an updated version available that you can download and unlock with the key that you obviously have. Good luck Bernd Link to post Share on other sites More sharing options...
Westerwald-Leica Posted July 28, 2010 Share #3 Posted July 28, 2010 Oh, just re-read your post. You received that software with your M8 which means it came out before snow-leopard for the imac. That very likely causes the crash because snow leopard does differ from its predecessor in a number of ways. So do get an updated version by download, that should work. Bernd Link to post Share on other sites More sharing options...
Big T Posted July 29, 2010 Share #4 Posted July 29, 2010 Oh, just re-read your post. You received that software with your M8 which means it came out before snow-leopard for the imac. That very likely causes the crash because snow leopard does differ from its predecessor in a number of ways. So do get an updated version by download, that should work. Bernd Ditto...... Had the same issue and all fixed with the latest version of CP1....... Link to post Share on other sites More sharing options...
perb Posted August 3, 2010 Share #5 Posted August 3, 2010 I installed the Capture I software that came with my M8 on my IMAC. Every time I try to use it I get a message that says "The Application Leica Digital Capture quit unexpectantly." Never had this problem with my PC. Can anyone explain what the problem might be? Thanks Apologies if I'm wrong, but if you mean the black CD marked "LEICA DIGITAL CAPTURE 1.0" then the following is copied from http://uk.leica-camera.com/assets/file/download.php?filename=file_3791.pdf 2.3 Is the software delivered with the camera, i.e. Capture One LE (RAW data converter) and LEICA Digital Capture (for remote control) compatible with Windows Vista and Mac OS 10.5 (Leopard) ? Users of the software Capture One LE can update their program once free of charge via the software manufacturer’s homepage (Das meistbegehrte Kamerasystem der Welt - Phase One). The actual software release Capture One 4 is compatible with Vista and Mac OS 10.5. The remote control software Leica Digital Capture is not compatible with Vista and Mac OS 10.5. An updated version is currently not planned. Regards Per PS. In Vista I can install and launch Leica Digital Capture, I can control the M8 via the USB cable, but the s/w fails to download the captured image. However, using the file explorer I can visit the internal M8 memory (NB: not the SD card) and copy the latest image file manually. Awkward, I know, but it can be done Link to post Share on other sites More sharing options...
Nicoleica Posted August 3, 2010 Share #6 Posted August 3, 2010 I installed the Capture I software that came with my M8 on my IMAC. Every time I try to use it I get a message that says "The Application Leica Digital Capture quit unexpectantly." Never had this problem with my PC. Can anyone explain what the problem might be? Thanks Hi Wilfredo. As Perb mentioned above, there is a difference between 'Capture 1' and 'Leica Digital Capture'. Capture 1 runs fine on iMacs (After getting the required updates. Although I don't use it anymore due to the way it grows unwanted files everywhere. I find Aperture much nicer to use.) but 'Leica Digital Capture' the remote-control software, does not work with recent OS-X versions. Link to post Share on other sites More sharing options...
Alberti Posted August 4, 2010 Share #7 Posted August 4, 2010 Advertisement (gone after registration) I installed the Capture I software that came with my M8 on my IMAC. Every time I try to use it I get a message that says "The Application Leica Digital Capture quit unexpectantly." Never had this problem with my PC. Can anyone explain what the problem might be? Thanks Hi Wilfredo, I have had exactly the same. I reported the crashing errors to Apple automatically, by setting that in Console preferences. After some time I got an update that was called something like "improved sequential read in database". Any way, I have not seen such problems after that update. You can keep the console open, continuously seeing the errors. I had taken some 3.000 shots on a trip. I prefer to have large daily groups, of often 200 pictures. Technically: I have an 25 inch iMac that I manually upgraded to Snow Leopard. Hope this helps you. albert Link to post Share on other sites More sharing options...
wilfredo Posted August 14, 2010 Author Share #8 Posted August 14, 2010 Hi Wilfredo, I have had exactly the same. I reported the crashing errors to Apple automatically, by setting that in Console preferences. After some time I got an update that was called something like "improved sequential read in database". Any way, I have not seen such problems after that update. You can keep the console open, continuously seeing the errors. I had taken some 3.000 shots on a trip. I prefer to have large daily groups, of often 200 pictures. Technically: I have an 25 inch iMac that I manually upgraded to Snow Leopard. Hope this helps you. albert Albert, I just sent the auto report, so will I get an e-mail from APPLE with an update? What I have is Leica Digital Capture 1. Thanks, Wilfredo+ Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.