sprice Posted April 14, 2010 Share #1 Posted April 14, 2010 Advertisement (gone after registration) I apologize in advance if this is a question that has been asked and answered many times, but how does one use filters on leica lenses, in particular an ND filter. Many thanks for any tips. Link to post Share on other sites More sharing options...
Advertisement Posted April 14, 2010 Posted April 14, 2010 Hi sprice, Take a look here Use of filters. I'm sure you'll find what you were looking for!
andybarton Posted April 14, 2010 Share #2 Posted April 14, 2010 You just screw them into the front in the vast majority of cases there's a recent thread about ND grad filters that you can find using the search facility if you wish Link to post Share on other sites More sharing options...
brill64 Posted April 14, 2010 Share #3 Posted April 14, 2010 lee filters makes a very compact but quite expensive rf-75 (rf=rangefinder, 75=75x75mm) filter system with 0.3, 0.6 and 0.9 graduated nd filters best bought as a set otherwise you can buy a screw-in type nd filter if you want a a solid grad. Link to post Share on other sites More sharing options...
Michael Geschlecht Posted April 14, 2010 Share #4 Posted April 14, 2010 Hello Sprice, Please remember, a filter thru the process of filtering definitionally only takes away. It never adds anything. Never. This is an important first rule to remember with all types of filters in all situations: Color, B&W, polarizing,ND, etc. Considering what it is you are taking away often helps you better decide which to choose and often when not to use any at all. Best Regards, Michael Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.