andalus Posted March 29, 2010 Share #1 Posted March 29, 2010 Advertisement (gone after registration) M9 coming in a day or three. I have a Luigi half case made for the m9 with a hanging flap. I want to buy the Thumbs Up EP 1. DO I HAVE to have my Luigi case cut down a bit to accomodate the Thumbs Up? I know Luigi makes these cut ones, but that's not what I've got. Can the TU be fitted OVER the Luigi leather and not be a problem, like not secured. ???? Please advise. Thanks much. Link to post Share on other sites More sharing options...
Advertisement Posted March 29, 2010 Posted March 29, 2010 Hi andalus, Take a look here Question re M9 and Thumbs Up EP 1. I'm sure you'll find what you were looking for!
gwelland Posted March 29, 2010 Share #2 Posted March 29, 2010 It won't fit and will attempt to push down the top edge of the rear of the case. There is no gap behind the TU to slip it over the case when positioned correctly, although in theory you could have the TU mounted in the flash shoe so that it sticks out a bit. I had the same issue and bought a replacement case with the cut out. Link to post Share on other sites More sharing options...
Shade Posted March 29, 2010 Share #3 Posted March 29, 2010 As previously stated, the TU won't fit, there's not enough gap (if any). So I guess you need to get a cutout case, or cut it yourself? Link to post Share on other sites More sharing options...
j_lir Posted March 29, 2010 Share #4 Posted March 29, 2010 i have a brand new black hanging door case that i can sell to you. pm me. thanks it has the cut-out for thumbs up model 1. thanks Link to post Share on other sites More sharing options...
Baptiste Posted March 29, 2010 Share #5 Posted March 29, 2010 I did cut my Luigi half case to fit the TU. Nevertheless, the stitching was doubled at the level of the TU, so that one could remove the needed part. Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.