Jump to content

Attachments for Hektor 28mm


Guest mc_k

Recommended Posts

Advertisement (gone after registration)

Hektor 28 apparently takes an 36mm push-on or 34mm screw-in. I would like to have a 34mm-to-39mm step-up ring made. Does the lens have the usual 34mm threading, or is there something special about it? Thanks

Link to post
Share on other sites

Hektor 28 apparently takes an 36mm push-on or 34mm screw-in. I would like to have a 34mm-to-39mm step-up ring made. Does the lens have the usual 34mm threading, or is there something special about it? Thanks

 

My recommendation would be to look for a SOOGZ / 13154 adapter. It will clamp onto A36 mounts and will accept E39 filters.

 

Best,

 

Jan

Link to post
Share on other sites

As per my B+W 'Filter Reference Bible' published for dealer use during the 1970's, Leitz used 34 thread with x 0.5mm pitch (34 x 0.5mm). However - word of caution: the refence book lists all A36 lenses that accept 34mm filters (Summar 2/50, Elmar 4/90mm, old Hektor 4.5/135mm) but, next to the listing for the 28mm Hektor it only lists the A36 filter mount. The 34mm thread option is not mentioned, as it is with the above lenses.

 

I did check my 28mm Hektor however, and it indeed has a thread that may well be 34mm.

 

Best,

 

Jan

Link to post
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...