Tulpenwahn Posted February 9, 2010 Share #1 Posted February 9, 2010 Advertisement (gone after registration) Is it possible that the SD card Panasonic Gold SDHC 8GB, Class 10, does not work in the M9? I am not able to format it. Card is not recognized by camera. Link to post Share on other sites More sharing options...
Advertisement Posted February 9, 2010 Posted February 9, 2010 Hi Tulpenwahn, Take a look here Problem with SD card. I'm sure you'll find what you were looking for!
Tulpenwahn Posted February 9, 2010 Author Share #2 Posted February 9, 2010 Ok, fourth try of inserting card helped. Could format it know. Wonder, if this was the last problem with this card. Link to post Share on other sites More sharing options...
brainiac37 Posted February 9, 2010 Share #3 Posted February 9, 2010 I don't know if this is a hardware or firmware issue, but your SD card issue is not necessarily going to go away. I had the same thing and even with multiple insertions, multiple formattings, different cards, etc., the SD card reader was still flaky. It's totally unreasonable. My suggestion is to get it repaired by Leica or get a replacement unit. Mine failed the first repair and had to be replaced. Link to post Share on other sites More sharing options...
250swb Posted February 9, 2010 Share #4 Posted February 9, 2010 It seems a bit extreme changing the camera before trying another SD card. Wasn't there some vague uniformity of opinion that it was Class 10 cards that were a problem, and this would probably be dealt with in the firmware upgrade? Steve Link to post Share on other sites More sharing options...
tom in mpls Posted February 9, 2010 Share #5 Posted February 9, 2010 Wasn't there some vague uniformity of opinion that it was Class 10 cards that were a problem, and this would probably be dealt with in the firmware upgrade? I have a class 6 that isn't recognized. Link to post Share on other sites More sharing options...
250swb Posted February 9, 2010 Share #6 Posted February 9, 2010 I have a class 6 that isn't recognized. Oh well I don't know then. I have have two Class 6 cards that are recognised so it clearly isn't a class issue. Steve Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.