JeffreyTotaro Posted December 15, 2009 Share #1 Posted December 15, 2009 Advertisement (gone after registration) I received my M9 recently and after some testing at least 3 of my lenses need some focus calibration. I have reached out to NJ about whats next but have not heard back yet. Are there other options as to who can do this work? Also, would I need to send the camera also or is this a standard adjustment. Most lenses are back-focusing. 50 Lux and 90 TE mostly. Link to post Share on other sites More sharing options...
Advertisement Posted December 15, 2009 Posted December 15, 2009 Hi JeffreyTotaro, Take a look here Lens Calibration & other options. I'm sure you'll find what you were looking for!
jaapv Posted December 15, 2009 Share #2 Posted December 15, 2009 There is no alternative to sending the lenses in for calibration. It does not neccessarily have to be to Leica. A competent camera repair facility can do this just as well. It should not be needed to send in the camera if that is correctly adjusted. The workshop will use a reference body. Link to post Share on other sites More sharing options...
tdtaylor Posted December 15, 2009 Share #3 Posted December 15, 2009 Any thoughts as to the range of costs for this. I only have experience with Nikon. Thanks, Link to post Share on other sites More sharing options...
Alnitak Posted December 16, 2009 Share #4 Posted December 16, 2009 Steve Choi in Los Angeles quoted me $180-230 per lens, depending. On what, I don't know. :-) Link to post Share on other sites More sharing options...
jaapv Posted December 16, 2009 Share #5 Posted December 16, 2009 Well, I paid 75 Euro at Will van Manen for a 90 AA summicron. It depends on the amount of work I suppose. Link to post Share on other sites More sharing options...
yanidel Posted December 16, 2009 Share #6 Posted December 16, 2009 I took a different approach that is I tweaked the M9 horizontal focus myself with the 2mm Allen key. I know this approach has been heavily debated on this forum as by doing so you might actually create new problems at different distances. Yet in my case, I am satisfied with the result I get. The way I approached it is to first understand what each of my lenses was doing (spot on, back focus, front focus, focus shifts ...) through tests. Then I listed the core lenses of my kit and tried to find a compromise that would work for them. As an example, I found 24mm Elmarit -> spot on 35mm Lux Asph -> spot on at F1.4, yet significant focus shift from F2 to F5.6 60mm Hex -> back focus Therefore I basically took the decison to misalign the rangefinder to have it front focus slightly, so I would get the following : 24mm Elmarit -> light front focus yet Dof takes care of it at 2-3 meters, not an issue. 35mm Lux -> object at the end of the in focus plane at F1.4 and when I stop down F2-F4 are now much better (I seldom use F5.6-F8 as F4 is the lens optimum) 60mm Hex -> spot on. Obviously, my other lenses that were spot on are now off, but I will probably sell them anyway with the advantage that those lenses remain unmodified. In you case, if most of your important lenses back-focus this could be a way to go. But again, this is debatable and sending everything to Leica (or a shop) maybe a more reliable alternative, though definitely more costly. Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.