-
Leica Q3 Accessory Recommendations: Batteries, Bags, Grips and more (2025)
-
The Leica Q3 (just like the Leica Q3 43) is an exceptional compact camera in itself: technically as well as in design.
But only the right accessories and individual accessories really make it your camera. Whether it's suitable chargers, the fastest SD cards, bags, straps & half cases or protection for lenses and display: in this guide you'll find the most popular add-ons from the community, clearly sorted by purpose.
All links are affiliate links: If you click on them and make a purchase, we will receive a small commission at no extra cost to you.
-
Leica Q3 Cameras
Are you looking for the Leica Q3 or Leica Q3 43? You can find them here in the official Leica Shop and at authorized dealers:
Leica Q3
Compact full-frame camera with fixed Summilux 28 mm f/1.7 ASPH lens, backside-illuminated 60 MP sensor selectable at 60/36/18 MP, hybrid phase- and contrast-detect AF, internal 8K/30 p and 4K/60 p video capture, integrated lens stabilization and macro focusing down to 17 cm.
Leica Q3 43
Compact full-frame camera with 60 MP BSI sensor and fixed Summilux 43 mm lens: records Triple-Resolution DNG files at 60, 36 or 18 MP, uses hybrid phase-detection AF and 5-axis stabilisation. A 5.76-million-dot EVF at 120 fps and a tilting 3-inch touchscreen aid composition, while video capture reaches 8K/30 p or 4K/60 p.
-
Leica Q3 Memory Cards
How fast the camera writes the data depends on the memory card, e.g. whether it complies with the UHS-II standard. Here is the SD card that is used in most cases in the Forum:
SanDisk Extreme PRO 128 GB SDXC UHS-II
SanDisk Extreme PRO 128 GB SDXC UHS-II memory card: read speeds up to 300 MB/s, write speeds up to 260 MB/s; UHS-II standard supports 4K and 8K recording and remains backward-compatible with UHS-I devices.
Sony SF-G128T SD Card (128 GB, UHS-II, SD Tough, G Serie)
Sony SF-G128T SDXC card with 128 GB capacity and UHS-II interface: TOUGH housing withstands 180 N bend force, survives 5 m drops and complies with IP68 for water and dust protection. Operates from –25 °C to 85 °C and resists X-rays, UV light and magnetic fields for dependable use in harsh environments.
Die besten, schnellsten und günstigsten SD Karten findest du im Leica‑Forum SD‑Karten Guide.
-
Leica Q3 Bags & Pouches
Oberwerth Q Backpack
Lightweight backpack crafted from water-repellent CORDURA® and vegetable-tanned leather: protects a Leica Q with accessories in the removable, flexibly partitioned camera insert and carries a 13" laptop or tablet in a separate compartment.
Kalahari L‑12 Kaama
Compact camera bag made of rugged canvas with genuine leather accents: offers padded storage for a DSLR or mirrorless body with mounted lens plus one additional lens. Movable dividers, a zippered front pocket and two side slip pockets hold batteries, memory cards and small accessories. Wide, length-adjustable shoulder strap with non-slip pad and top handle; covered zipper protects contents from dust and splashes.
Peak Design Everyday Sling 3L V2
Peak Design Everyday Sling 3L V2: compact sling bag specifically for Leica Q3 and Q3 43. FlexFold dividers create custom padded compartments, weather-resistant 400D nylon shell with water-repellent UltraZips. Perfect for quick access without bulky bag.
Peak Design Everyday Sling 3 L
3-litre sling for the Leica Q3 and similar gear: FlexFold dividers create custom padded compartments, soft-lined pockets and a key tether keep accessories organised. Weather-resistant recycled 400D nylon shell with water-repellent UltraZips, continuously adjustable quick-slide strap for sling or waist carry, extra strap for attaching tripod, jacket or bottle outside.
The Q Bag® Rhubarb Edition - Leica Q3 Bag
Precision-fit shoulder bag in water-repellent, vegetable-tanned Rhubarb leather, tailored to Leica Q3, Q2 and Q; soft Alcantara lining cushions camera and lens, an extra pocket stores battery or memory cards; Fidlock magnetic clasp allows one-handed opening, while adjustable leather strap and reinforced base plate secure the carry.
Billingham Hadley Digital Camera Bag
Billingham Hadley Digital: smallest bag in the Hadley range, perfect for Leica Q3 and Q3 43. Waterproof 3-layer material with genuine leather and brass fittings. Quick-release system for one-handed operation, padded dividers. Made in England, 5-year warranty.
ONA Bag Bowery
Handcrafted ONA Bowery camera bag in full-grain antique cognac leather: padded interior with removable divider holds a mirrorless body and up to two lenses, five exterior pockets organise accessories, while brass hardware, waxed finish and an adjustable shoulder strap add durability.
Oberwerth The Q Bag®
Precisely tailored shoulder bag for Leica Q3 and Leica Q3 43: vegetable-tanned leather with soft lining shields camera and lens from impacts and scratches, magnetic closure offers rapid access, internal compartment holds spare battery or memory card, length-adjustable shoulder strap and rear loop allow alternative carrying options, handcrafted in Germany.
Wotancraft Pilot 2L Travel Camera Bag
Wotancraft Pilot 2L: perfect travel bag for Leica Q3 and Q3 43. Leica Q3 fits perfectly with lens hood attached and camera strap. Removable padded insert, compact size without bulky appearance. Premium materials and craftsmanship.
-
Leica Q3 Half Cases
Oberwerth Leica Q3 Half Case with wooden grip
Precision-fit half case crafted from vegetable-tanned leather for the Leica Q3: shields base and flanks while leaving battery and SD slots accessible. Recessed wooden grip enhances handling, soft Alcantara lining guards against scratches. Built-in ¼" tripod thread; made in Germany.
MUZIRI KINOKOO Half Case
Precision-fitted MUZIRI KINOKOO half case crafted from hard-wearing leather: shields the Leica Q3’s baseplate and grip from scratches, while the soft microfiber lining prevents abrasion. Battery and card slots stay accessible without removing the case, and an integrated 1/4" thread enables direct tripod mounting.
Oberwerth Leica Q3 Half Case
Precision-fit half case in vegetable-tanned full-grain leather with soft Alcantara lining: shields the Leica Q3’s base and edges from scratches, impacts and dirt. Magnetic flap allows direct access to the battery/SD compartment; all controls and the tilting display remain unobstructed. Underside 1/4" thread with Arca-Swiss profile permits quick tripod changes. A concealed compartment secures an Apple AirTag for easier camera tracking.
JJC Neopren Pouch
5 mm thick JJC neoprene pouch: shields the camera from dust, moisture and impacts and secures with a drawstring closure. Carabiner clip and belt loop attach to bag or belt, a flat bottom seam lets the pouch stand upright, and a soft inner lining meets a water-repellent, slightly elastic exterior; available in multiple sizes.
Leica Protector Q3 (Half Case)
Precisely fitted leather half case for the Leica Q3: covers the bottom plate and sides, guards the body against scratches and adds grip. All controls, the tiltable display, and the battery-plus-card compartment remain fully accessible.
Lim’s Leather Half-Case
Precision-fit Lim’s leather half case for Leica Q3: genuine cowhide with microfiber lining, anodized-aluminum baseplate with integrated 1/4" tripod socket, unrestricted access to battery/SD compartment, ports and tilting screen, quick attachment via robust screw lug.
-
Leica Q3 Straps
Peak Design Leash V3 Camera Strap
Peak Design Leash V3: world's most versatile camera strap, configurable as sling, neck, shoulder strap or safety tether. Easy length adjustment with dual aluminum adjusters, quick connection via Anchor Link system. Adjustable from 83-145 cm, holds up to 90 kg.
Leica Finger Loop Size L
Precisely fitting size-L finger loop made of rugged, non-slip leather: slides into the docking slot of the Leica M Handgrip / Multi-Function Handgrip, supports middle and ring fingers and shifts camera weight to the palm. Clips on or off in seconds and stows away compactly.
Peak Design Capture Clip V3
Rugged aluminum clip for shoulder or hip straps up to 6.4 cm wide: supports camera loads up to 90 kg, locks with an Arca-compatible quick-release plate and releases the camera at the press of a button.
Peak Design Leash Strap
Lightweight, 19 mm camera strap made of abrasion-resistant nylon webbing: adjusts smoothly from 83 to 145 cm via aluminum quick-pull slider, clicks on and off in seconds with four included Anchor Links and withstands loads up to 90 kg. Serves as neck, shoulder or sling strap, rolls up compactly and slips into any camera bag.
Peak Design Cuff Wrist Strap
Peak Design Cuff: comfortable wrist strap for Leica Q3. Quick connection via Anchor Link system, adjustable length for different wrist sizes. Ideal for compact cameras, enables secure one-hand operation. Soft nylon webbing with aluminum adjusters.
-
Leica Q3 Flash Lights
LightPix Labs FlashQ Q20II
Compact LightPix Labs FlashQ Q20II hot-shoe flash with integrated 2.4 GHz radio module: operates as on-camera transmitter or off-camera receiver up to about 10 m, offers guide number 20 (ISO 100, 28 mm), manual output from 1/64 to full in seven steps, and a reflector that tilts 90° upward. Built-in 5600 K LED continuous light with seven brightness levels, supplied diffuser and color filter, Li-ion battery rechargeable via Micro-USB, 1/4″ tripod socket, housing weight 115 g.
Leica SF40
Godox Lux Cadet
Manual hot-shoe flash in retro design: guide number 32 (ISO 100), five power levels from 1/1 to 1/16, reflector tilts 0–90° for direct or bounce lighting, analogue dial links ISO, aperture and distance for swift exposure control, standard centre contact and PC-sync port for broad camera compatibility, two AA batteries deliver around 200 flashes with ~2 s recycle time, 6000 K ± 200 K colour temperature, flash duration 1/300–1/20 000 s, weight 171 g.
Godox Lux Junior
Compact hot-shoe flash with guide number 12 (ISO 100, 28 mm): fits cameras with a standard hot shoe, offers A automatic and manual modes with seven power settings from 1/1 to 1/64. Optical slave functions S1/S2 for off-camera use, sync time up to 1/250 s. Flash duration 1/800–1/20 000 s, recycle time 0.1–1.5 s. Powered by two AAA batteries, weight 130 g.
Godox Lux Senior
Foldable retro flash with shell-shaped reflector: guide number 14 (ISO 100, 28 mm), automatic mode for ISO 100 / F2.8 / 1/60 s and manual power in seven steps from 1/1 to 1/64. Colour temperature 6000 K ± 200 K, recycle time up to 3 s, about 150 flashes per charge. Integrated 1700 mAh lithium battery, USB-C charging. Triggering via standard hot shoe, optical slave (S1/S2) or sync cable. Folded size 84 × 114 × 48 mm, weight 227 g. Scope of delivery: diffuser, USB-C charging cable, sync cable, fabric pouch.
Leica SF60
Leica SF60 system flash with guide number 60 (ISO 100, 200 mm): supports TTL metering, high-speed sync up to 1/8000 s, recycle times from 0.1 s and up to 220 flashes per battery set. Motorised zoom head for 24–200 mm lenses (18 mm with diffuser), tilts 90° upward and rotates 180° for bounce use. Integrated 24 W LED for continuous light or video, built-in radio receiver for remote control via Leica SF C1 and optical slave mode. Weighs about 300 g, runs on 4 × AA cells or optional Li-ion battery pack; compatible with Leica S, SL, TL, M10, Q and CL.
Godox iM30 Mini
Palm-sized LED panel in an aluminium housing: provides continuous light with a 2700–6500 K variable colour temperature and stepless dimming, powered by an integrated Li-ion battery rechargeable via USB-C. Magnetic rear panel, 1/4" thread and cold-shoe adapter allow quick mounting to cameras, rigs or metal surfaces; detachable diffuser for softer light included, total weight 110 g.
Leica Wireless flash controller SF C1
Compact 2.4 GHz radio trigger for Leica system flashes: sits in the camera’s hot shoe and controls compatible units such as the SF 60 in three groups on eight channels over distances up to 100 m. Handles TTL, HSS up to 1/8000 s and manual power or zoom adjustment, shows settings on a back-lit LCD and is fine-tuned via two control dials. An integrated Li-ion battery charges via USB; an additional hot shoe on top accepts further accessories.
-
Leica Q3 Misc
Vello LCD Screen Protector Ultra II for Leica Q3 Camera
Expert Shield Crystal Clear Screen Protector for Leica Q3
Expert Shield Anti-Glare Screen Protector for Leica Q3
Expert Shield Glass Screen Protector for Leica Q3
JJC Skin Cover Leica Q3
Precisely cut JJC protective film and skin cover for Leica Q3: shields display and housing from scratches, smudges and mild bumps while keeping all controls and ports fully accessible. Applies in minutes without bubbles, removes cleanly and preserves touch sensitivity as well as the camera’s original look.
Expert Shield Display Protection
Precisely cut Expert Shield screen protector made of 0.3 mm tempered glass for the Leica Q3: shields the display from scratches, dust and fingerprints, maintains image clarity and touch responsiveness, installs bubble-free via a silicone adhesive layer and removes without residue when required; supplied with cleaning cloth, microfiber cloth and dust remover for a clean setup.
Kinokoo Screen Protector Leica Q3/Q3 43
9H hardness tempered glass screen protector for Leica Q3 and Q3 43: 0.25mm thin, scratch-resistant and bubble-free. Perfect fit with precise cutouts for all controls. Protection against impacts and scratches without affecting image quality.
-
-
Leica Q3 Batteries
Leica BP-SCL6 Battery
Original Leica BP-SCL6 lithium-ion battery, 8.7 V/2,200 mAh: supplies 17 Wh to the Q3, permits in-camera or external charging, shows the remaining charge precisely on the camera display, integrated protection against over-charging, overheating and short-circuit.
Rechargeable Li-ion Battery Compatible with Leica BP-SCL6 (19531) Battery
Li-Ion battery replacement for Leica BP-SCL6 (19531): supplies 7.2 V/2200 mAh for extended shooting, works with the original BC-SCL6 charger, and features integrated overcharge, over-voltage and short-circuit protection.
-
Leica Q3 Charger
Dual USB-C charger (3rd-party)
Third-party dual USB-C power adapter with up to 65 W total output: automatically adjusts power per port, provides multi-layer protection against over-voltage and overheating, CE certified.
Leica BC‑SCL6 USB‑C Dual Charger
Leica BC-SCL6 USB-C Dual Charger: charges two BP-SCL6 batteries simultaneously via USB-C Power Delivery up to 65 W, controls each slot independently and shows progress with four-level LEDs; metal housing, USB-C cable included, compatible with the Leica Q3.
USB travel charger compatible with Leica BP-SCL6 battery
Compact USB travel charger for Leica BP-SCL6 batteries: charges from power bank, laptop or USB power adapter, suitable for mobile use. An LED indicator shows charging progress, and integrated safety circuits prevent overcharge, short circuit and overheating. The lightweight, durable housing fits into any camera bag, while the detachable USB cable enables flexible placement.
-
Leica Q3 Charging Grip
Drop XL Wireless Charger
Qi charging pad with extended surface: wirelessly supplies two devices with up to 15 W each and charges a third via USB-A, while the non-slip textile top guards against scratches and an aluminium core enhances heat dissipation.
Leica Wireless-Charging Hand Grip HG-DC1
Aluminium hand grip for the Leica Q3: improves handling, integrates a Qi charging coil for wireless power on compatible pads, keeps battery and memory card fully accessible, adds an extra ¼″ tripod thread and attaches or removes in seconds via the base screw.
-
Leica Q3 Grips
Haoge HG-Q3W Hand Grip for Leica Q3
Specifically designed Haoge hand grip for Leica Q3 and Q3 43 cameras: screws into the tripod socket in seconds, sits flush with the body and offers a steadier, more secure hold during shooting. Improves balance and enables stable one-hand shooting.
L-Shape Mount Plate with Handle for Leica Q3
Precisely machined L-shaped mounting plate in anodised aluminium with removable walnut grip: fits the Leica Q3 exactly, provides an Arca-Swiss profile on both base and side plate for rapid landscape-to-portrait changes, leaves battery and memory card compartments unobstructed.
Smallrig Cage
Precisely machined aluminium cage kit for Leica Q3: encases the camera body rigidly, shields it from impacts and prevents twisting. Numerous 1/4"-20 and ARRI 3/8" threads and an integrated cold shoe offer flexible accessory mounting. Arca-Swiss compatible baseplate enables quick swaps between tripod and handheld use, while all controls and the battery compartment stay fully accessible.
Haoge HG-Q3W Camera Bracket Holder
Specifically designed Haoge HG-Q3W hand grip for Leica Q3 and Q3 43 cameras: screws into the tripod socket in seconds, sits flush with the body and offers a steadier, more secure hold during shooting.
PolarPro - BaseGrip - Leica Q3 - Bronzed Aluminium
Precisely fitting BaseGrip made of anodized bronze aluminium: enlarges the Leica Q3’s grip area, guards the base plate and, with an integrated Arca-Swiss dovetail, attaches directly to a tripod.
Metal Hand Grip Secure L Bracket Holder for Leica Q3
Precision-fit aluminum hand grip for the Leica Q3: improves hold and balance, enables stable one-hand shooting and makes vertical compositions easier. The integrated Arca-Swiss compatible base plate allows quick tripod changes while keeping battery and card slots accessible. A non-slip leather inlay protects the camera body, and the grip attaches tool-free via a 1/4" screw in seconds.
-
Leica Q3 Soft Release Buttons
Leica Soft Release Button 12 mm – Aluminium, Black anodized
Black anodized aluminum Leica soft release button, 12 mm diameter: enlarges the shutter-release surface, provides a smoother pressure point and reduces camera shake.
Artisan Obscura Wood Soft Release 11 mm – Gaboon Ebony (Convex)
Deep-black Gaboon ebony soft-release button, 11 mm in diameter and convex shaped. Brass thread with O-ring ensures a secure fit in standard threaded shutter releases.
Leica Soft Release Button – Brass, 100 Years Edition
Soft-release button made of brass, 100 Years Edition: enlarges the contact area of the shutter release, promotes a smooth, even press and helps minimise shake. Silver-chromed finish with anniversary engraving.
Match Technical ‘Beep’ Soft Release – Black
Domed soft-release button made of black-anodized brass: screws into the standard shutter thread, stays secure with an O-ring and shields the thread from wear; 10 mm diameter, roughly 3 g, suitable for Leica M, Fujifilm X-Series and other cameras with a threaded release.
VKO handcrafted wooden release button
Handcrafted VKO wooden soft-release button made from oiled hardwood: enlarges the shutter contact area, enables gentle, low-vibration triggering and lends the camera a warm, natural feel.
Leica Soft Release Button 12 mm - Aluminium, red anodized
Leuchtend roter 12 mm-Button; verschraubt sich im Q3-Gewinde, für präzisere Auslösung & individuellen Look.
-
Leica Q3 Thumb Grip
LIM’S Thumb Support Grip (6061 Alu, Black)
Precision-milled 6061 aluminium with hard-anodised finish; protective film on foot, tailor-made for Q3.
Match EP-LQ3 “Thumbs Up” Grip
Brass grip with 22° ergonomic bevel; flat top, silicone pad protects hot-shoe, adds comfort and balance.
Leica Thumb Support Q3 Aluminium black
Official Leica thumb support made from aluminium in black for the Q3. Ergonomic support with integrated push-through buttons for function buttons FN1 and FN2. Perfect fit and high-quality aluminium with matte finish.
Leica Thumb Support Q3
Precisely machined thumb support from anodized aluminium: slides into the Leica Q3 accessory shoe, expands the thumb rest and delivers a secure, steady grip while shooting.
Haoge THB-Q3B Thumb Up Grip
Anodised-aluminium thumb rest with anti-slip silicone pad; dampens vibration and gives a steadier one-hand hold.
PolarPro ThumbGrip Bronze
Precision-machined PolarPro thumb rest in aluminium with bronze finish: slides into the hot shoe, improves grip and steadies the camera during shutter release. A rubberised underside prevents scratches, cut-outs keep adjacent controls clear.
-
Leica Q3 Lens Caps
Leica Lens Cap Q, E49, Aluminium black
Official Leica lens cap made from anodised aluminium for Q3 and Q3 43: CNC-milled for wobble-free fit, soft insert inside prevents scratches. Slim profile preserves camera silhouette, grooved rim allows easy mounting even with gloves.
Haoge metal lens cap for Leica Q3 and Leica Q3 43
Precision-fitted anodised aluminium lens cap: shields the Leica Q3 and Q3-43 front element from dust, scratches and spray. CNC-milled for a wobble-free fit, lined inside with a soft insert to prevent abrasion. Slim profile preserves the camera silhouette, grooved rim allows quick on- and off-mounting even with gloves.
-
Leica Q3 Lens Hoods
PolarPro - MagFlip Hood
Precisely molded PolarPro MagFlip Hood from light-absorbing polymer: minimizes stray light and reflections, protects the front element, flips down 180° for quick filter changes and locks magnetically in both positions.
Leica Q3 lens hood, aluminum round
Precision-milled round aluminum lens hood for the Leica Q3: reduces stray light and reflections, shields the front element from bumps and scratches, locks play-free via bayonet mount, and remains compatible with lens cap and filters.
Freewell Real Lens Hood Q3 43
Freewell "Real" lens hood specifically for Leica Q3 43: enables easy access to 49mm filters, protection against stray light and lens flares. CNC-machined aluminium construction with matte finish. Vintage aesthetics with modern functionality.
Haoge LH-LQ343B Metall Lens Hood
Precisely machined Haoge LH-LQ343B lens hood in anodised aluminium: blocks lateral stray light, reduces internal reflections and shields the front element from impacts. Bayonet mount engineered for the Leica Q3, delivering a play-free fit while leaving filter threads accessible. Matte-black, ribbed interior finish further suppresses reflections.
-
Leica Q3 Filter
Manufactured by B+W with MRC nano glass technology from B+W. Perfectly tailored to your Leica Q3 43 camera. Enables use in macro mode with the original lens hood. In cooperation with B+W, Tekiac has developed the innovative mounting aid. With the mounting aid, the ultra slim filter is very easy to handle.
Manufactured by B+W, the B+W Ultra Slim Black Mist 1/4 filter gives your images deeper blacks and a "blooming" effect around light points. The B+W Ultra Slim Filter allows you to use the macro mode with the original lens hood. With the mounting aid, the ultra slim filter is very easy to handle.
B+W MRC nano 007 Clear Filter 49mm
High-quality protection filter from B+W with MRC nano multi-coating in 49mm for Leica Q3 and Q3 43. Crystal-clear optics without UV protection, as not needed for digital cameras. Multi-Resistant Coating keeps the filter cleaner and makes cleaning easier.
Manufactured by B+W, the B+W Ultra Slim White Mist 1/4 Filter gives your images a soft, atmospheric glow and soft highlights without compromising detail. Especially in backlit situations, such as sunrise or sunset, the filter creates a sophisticated "blooming" effect that makes your images appear vibrant and cinematic. The B+W Ultra Slim Filter allows you to use the macro mode with the original lens hood. With the mounting aid, the ultra slim filter is very easy to handle.
B+W 49 mm UV-Filter MRC
Plane-parallel Schott glass UV cut-off filter with 49 mm thread: blocks ultraviolet stray light for accurate colour and exposure, double-sided MRC multi-coating minimises reflections and repels water, oil and dust. The precisely milled brass mount turns smoothly, retains its shape and serves as permanent front-element protection without causing vignetting.
The B+W Ultra Slim 803 ND 0.9 filter is the perfect ND ("neutral density") filter for the Leica Q3 43. This filter is manufactured by B+W and uses the B+W MRC nano technology. This ND filter allows you to work creatively even in very bright light conditions and prevent the rolling shutter effect.
