dcuthbert Posted June 2, 2009 Share #1 Posted June 2, 2009 Advertisement (gone after registration) morning all, anyone able to tell me if the voigtlander 28mm (new f2 version) should bring up the correct frame lines in the m6? slapping mine on, i get the 50mm lines showing. Thanks Link to post Share on other sites More sharing options...
Advertisement Posted June 2, 2009 Posted June 2, 2009 Hi dcuthbert, Take a look here Voigtlander 28mm f2 and M6. I'm sure you'll find what you were looking for!
alifie Posted June 2, 2009 Share #2 Posted June 2, 2009 My CV 28/1.9 is in LTM so I can have any frameline I like, don't know if the f2 is LTM or bayonet. Link to post Share on other sites More sharing options...
hunghang Posted June 2, 2009 Share #3 Posted June 2, 2009 Yes it should... I had that combination and that worked fine..... Link to post Share on other sites More sharing options...
Photon42 Posted June 2, 2009 Share #4 Posted June 2, 2009 Are you sure the lens is properly locked in place? AFAIK, the 28/90 flange prong to trigger the frame lines is the longest of the three options. If the lens isn't twisted in completely, it could potentially activate the wrong frame lines, I'm afraid. The order to the best of my knowledge is: 28/90 -> 50/75 -> 35/135 Regards Ivo Link to post Share on other sites More sharing options...
Shootist Posted June 2, 2009 Share #5 Posted June 2, 2009 Brings up the correct framelines on both my M8's. Those are the only M's I have that have 28mm framelines. I suspect you have not locked it in all the way. It should move the lever all the way to the right (closest to the lens). Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.