35mm to 645 question

[PetPhoto]

Advertisement (gone after registration)

Going by the lack of actual dimensions online,  the beseler cadet II enlarger was given a bellows stage and lensboard very similar, if not the same as the current Printmaker 35/67 enlarger.. 

 

In theory, is anything other then a home made negative carrier and possible hack saw work to make a the hole at the top of the bellows stage large enough to show the entire 645 negative be needed? 

[BernardC]

You will also need a new light source. The condensers won't cover 645, so you'll get huge vignetting. The edges of your negs may not get any light at all.

I would look for a working medium format enlarger rather than butchering an enlarger that doesn't do medium format.

[PetPhoto]

you did notice teh spot where i said i have a complete 67c enlarger lamphouse with complete condensor lens sets to do both k120 and 35mm

[BernardC]

In that case, I suggest you start here: https://www.beselerphoto.com/parts/

You'll see full parts listings for the 67 and Cadet, which should tell you what you need to turn one into the other.