Miops Splash and Sl Typ601

[DCIreland]

Advertisement (gone after registration)

Hi All

I have a Leica SL Typ 601 and am looking for advice on how to connect a Miops Splash trigger to it, either via adaptors or a flash trigger please.

Thanks for any advice. 

[mokona]

Since the Leica SL uses a proprietary port, one option would be to buy the RC-SCL4 remote controller, cut the cable and wire it to a jack cable.

 

Edited February 23, 2024 by mokona

[helged]

23 hours ago, DCIreland said:

Hi All

I have a Leica SL Typ 601 and am looking for advice on how to connect a Miops Splash trigger to it, either via adaptors or a flash trigger please.

Thanks for any advice. 

Simplest solution is to get the Panasonic cable, and add a 2.5mm to 3.5mm plug on the Panasonic end. It works. 

 

[DCIreland]

3 hours ago, mokona said:

Since the Leica SL uses a proprietary port, one option would be to buy the RC-SCL4 remote controller, cut the cable and wire it to a jack cable.

 

Thank you

[DCIreland]

3 hours ago, helged said:

Simplest solution is to get the Panasonic cable, and add a 2.5mm to 3.5mm plug on the Panasonic end. It works. 

Thank you

 

[DCIreland]

3 hours ago, helged said:

Thanks Helged, can you confirm which Panasonic version of the MIOPS cable please as there are a lot, many thanks. 

 

[mokona]

Advertisement (gone after registration)

4 hours ago, helged said:

Simplest solution is to get the Panasonic cable, and add a 2.5mm to 3.5mm plug on the Panasonic end. It works. 

 

This solution is for SL2 and not SL type601

[helged]

1 hour ago, DCIreland said:

 

Cable P1. 

[helged]

52 minutes ago, mokona said:

This solution is for SL2 and not SL type601

I dont have SL601 any more, but I am quite sure (based on my memory...) that the Panasonic cable+adapter plug works on SL 601 as well.