Godox X PRO II Leica will trigger V1 and TT350 on Q3 in TTL Mode

[adrianh]

Advertisement (gone after registration)

I have just had found time today to test my recently arrived Godox X PRO II L with my Godox Flashes V1S and TT350S (both for Sony Mount). I can gladly confirm that everything works in TTL Mode with all sync speeds (of course only off camera, the Sony versions do not flash on camera due to the different shoe contacts). The V1 had no issues powering all the way up to 1/2000s, the small TT350S lit a dark room until 1/1000s but struggled with the same at 1/2000s. However, I am sure it can be used perfectly as a fill flash all the way up to  1/2000s. Of course, the V1 is in another league (both power- but also size wise). 

Just make sure to use the latest firmware version on both trigger and flash. For example, my trigger arrived fresh from the dealer with Firmware 1.1, the latest Firmware being 1.4! Update process PITA and very much dependant on what cable you use. 

However, the price / value ratio is unbeatable with those Godox flashes. Very happy that everything works as supposed. 

 

Edited December 17, 2023 by adrianh

[AdHox]

I was very pleased when I found the XProII L in stock as it meant I suddenly had access to off camera flash with my existing V1s flashes for a very minor cost.

I still have and use the Leica SF-40 when I want a compact on-camera option,

Thank you for the prompt - I really should check what f/w my triggers have.

[Pelu2010]

These are made with the Xpro II L and a AD 600 pro 

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

[Alex_W]

i just bought the xproII for Leica along with the V850III. The transmitter is firing the flash with no problem (as long as the test fire button is used) as soon as I put the transmitter on my Leica Q3, the transmitter will not send a signal to the flash. Does anyone know what might be going wrong? 

[adrianh]

Please check the hot shoe position of your transmitter, You might want to move it slightly away from the full-in position. I had some issues with another flash on the Q3 for exact this same reason. However the transmitter worked fine.  

[stewartweir]

Hi all, can someone confirm that the Godox XProII-L TTL works on the Q3 ? I just spoke to UK rep of Godox and he said it doesn’t. Thanks

[adrianh]

Advertisement (gone after registration)

Yes, I can confirm it. I have it here on Seychelles with me, and it works great with the V1S .

As a side note, I have brought along a TT350N that I use on camera with my Hasselblad X2D, and this will also control the V1 remotely. Of course, the TT350N will work on the Q3  on-camera only in manual mode, but this is to be expected. 

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

Edited February 13, 2024 by adrianh

[adrianh]

Just to reconfirm, I've just finished an extensive shoot outdoors with the Q3.  The V1 has fired up properly until 1/1250 under TTL control with the X-PRO II L. At 1/2000 the V1 will not fire up, but I think this is related to the lag of the trigger.