hdmesa Posted May 5, 2023 Share #21 Posted May 5, 2023 Advertisement (gone after registration) 5 hours ago, DBounce said: I’ve just noticed this issue with my new Summilux 35mm FLE2 on the M11M. The vertical alignment seems slightly off. It’s not an issue with the Voigtlander lenses. This is what's weird with the M11 rangefinder that I didn't experience with the M10 variants – certain lenses alter the vertical alignment of the rangefinder patch. Something about the mechanical linkage can be affected by physical difference between the lenses. Link to post Share on other sites More sharing options...
Advertisement Posted May 5, 2023 Posted May 5, 2023 Hi hdmesa, Take a look here Rangefinder vertically misaligned but only at close distances?. I'm sure you'll find what you were looking for!
DBounce Posted May 5, 2023 Share #22 Posted May 5, 2023 2 hours ago, hdmesa said: This is what's weird with the M11 rangefinder that I didn't experience with the M10 variants – certain lenses alter the vertical alignment of the rangefinder patch. Something about the mechanical linkage can be affected by physical difference between the lenses. Actually, both the Voigtlander and Summilux seem off now. Is it the lens that messed up the alignment or just an out of spec camera? Link to post Share on other sites More sharing options...
hdmesa Posted May 5, 2023 Share #23 Posted May 5, 2023 54 minutes ago, DBounce said: Actually, both the Voigtlander and Summilux seem off now. Is it the lens that messed up the alignment or just an out of spec camera? Impossible to say without further testing. You might also try gently pushing around the roller inside the lens mount to see if that will reset things. Link to post Share on other sites More sharing options...
dustyvudoo Posted July 16, 2023 Share #24 Posted July 16, 2023 I've been having the same issue on my M10. I bought it used from the local Leica Store, and I noticed no issue until a couple weeks in when the vertical alignment started to get worse and worse at all levels. Sent it in through the Leica store to New Jersey and picked it up two months later; looking through the finder, the misalignment was more corrected but still off, however, it was spot on at certain distances. I have been adjusting it with hex wrench but either one or the other infinity vs close range are on and the other is off alignment. It's good to see that others are having this problem. I know it's not the lenses, my M240 and M6 have no such problem with the vertical alignment at all ranges. Link to post Share on other sites More sharing options...
bkphoto Posted July 17, 2023 Share #25 Posted July 17, 2023 I was thinking mine had an issue as well but I just assume this is a parallax issue at close range (under 2m)? Can you post a photo of what you’re seeing? Link to post Share on other sites More sharing options...
bkphoto Posted July 17, 2023 Share #26 Posted July 17, 2023 Check out this post: Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now