laurin Posted September 5, 2007 Share #1 Posted September 5, 2007 Advertisement (gone after registration) Hallo Leute, ich möchte diese Kombi auch mal ausprobieren. Am Waschzettel ist nur die Zeit für 400ASA angegeben(1min. Kipp). Ich möchte den Tri-x aber mit wie 800 bzw.1600 belichten. Die Zeiten für die Push-Entwicklung sind bloß für den 3 sec. Rhythmus bzw Rotation angegeben. Im Netz finde ich auch nichts...... Wer von euch hat diese Kombi "in Gebrauch"? LG Gernot Link to post Share on other sites More sharing options...
Advertisement Posted September 5, 2007 Posted September 5, 2007 Hi laurin, Take a look here Tri-X in Emofin. I'm sure you'll find what you were looking for!
el.nino Posted September 5, 2007 Share #2 Posted September 5, 2007 PHOTOTEC Entwicklungszeiten-Rechner Link to post Share on other sites More sharing options...
laurin Posted September 5, 2007 Author Share #3 Posted September 5, 2007 Hallo Daniel, danke, den Rechner kenne ich natürlich auch, mir geht es da eher um praktische Erfahrungen. Ich weiß aber auch, dass ich ums Testen nicht umhin kommen werde. Beste Grüsse, Gernot Link to post Share on other sites More sharing options...
tomparis Posted September 5, 2007 Share #4 Posted September 5, 2007 Hallo Gernot, den Tri-X würde ich nicht bis 1600 pushen, eher so 1000/1250 (kommt natürlich auf Deine Motive usw. an). In Emofin habe ich den Tri-X im 3 Sek. Rythmus geschüttelt, das geht ganz gut. Macht man nicht alle Tage, aber es geht. Die angebenen Zeiten sind gut. Negative sind gut durchzeichnet, ausgeglichen, Korn hält sich in angenehmen Grenzen. Probier es aus! Gruß Thomas Link to post Share on other sites More sharing options...
jonathan_r Posted September 5, 2007 Share #5 Posted September 5, 2007 I'm afraid my German is very poor, but if you are seeking information on developing Tri-X in Emofin, this is my standard combination. Rate at 800 ISO and give it 3m 30s at 20 deg C in each bath, inverting every 3 secs. Three second inversions sound tedious, but they make the time go quickly. Common advice is NOT to use an acid stop bath, but I use an acetic acid stop bath without harmful effects. Link to post Share on other sites More sharing options...
laurin Posted September 5, 2007 Author Share #6 Posted September 5, 2007 Hi Jonathan, thanx a lot. Regards, Gernot Link to post Share on other sites More sharing options...
laurin Posted September 5, 2007 Author Share #7 Posted September 5, 2007 Advertisement (gone after registration) Dank an alle! Gernot Link to post Share on other sites More sharing options...
christer Posted September 5, 2007 Share #8 Posted September 5, 2007 I use an acetic acid stop bath without harmful effects. hopefully not between the two baths? that would be harmful ;-) chris Link to post Share on other sites More sharing options...
jonathan_r Posted September 5, 2007 Share #9 Posted September 5, 2007 Very true, Chris! ;-) Maybe I should expand on that, anyway. The acid stop is expected to react violently with the sodium bicarbonate in the alkaline Step 2 of the developer, causing physical damage to the emulsion. I've never seen any sign of this. As a precaution, I start agitating (twirling the spiral) as soon as the stop bath is in there. Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.