NRKstudio Posted June 3, 2020 Share #1 Posted June 3, 2020 Advertisement (gone after registration) Hi I have a m10M and when using live view on the rear screen, random horizontal black or gray lines appear and disappear. It’s like the processor is having difficulty reading out data from the sensor. Kind of like bad reception on an old TV. Is anyone else experiencing this? The pics come out fine though. Link to post Share on other sites More sharing options...
Advertisement Posted June 3, 2020 Posted June 3, 2020 Hi NRKstudio, Take a look here M10M lines on rear screen issue. I'm sure you'll find what you were looking for!
Anakronox Posted June 6, 2020 Share #2 Posted June 6, 2020 I have yet to see anything like this. In fact, I just got back from a long walk where I did some long exposures with my M10M. I used live view extensively Nd cheeped through almost a full battery. It got slightly warm, up I saw no issues with the screen. It sounds like you need to contact Leica support. Link to post Share on other sites More sharing options...
NRKstudio Posted June 25, 2020 Author Share #3 Posted June 25, 2020 On 6/6/2020 at 1:14 PM, Anakronox said: I have yet to see anything like this. In fact, I just got back from a long walk where I did some long exposures with my M10M. I used live view extensively Nd cheeped through almost a full battery. It got slightly warm, up I saw no issues with the screen. It sounds like you need to contact Leica support. @Anakronox Thanks, yes I have been seeing this with the level gauge turned on and off, and many other settings toggled on and off. Unfortunately, It may be many months before Leica fixes it so I may have to live with the issue. I also reset the camera and nothing happened. I posted pics of this in Jono's review thread to see if anyone there found this issue, but no luck. Does your live view every flutter or stutter, like the processor is trying too hard to process a live view with high iso? Like in a dim setting with exposure simulation on "permanent" setting. Here's a picture of the issue below too. Welcome, dear visitor! As registered member you'd see an image here… Simply register for free here – We are always happy to welcome new members! Link to post Share on other sites Simply register for free here – We are always happy to welcome new members! ' data-webShareUrl='https://www.l-camera-forum.com/topic/310249-m10m-lines-on-rear-screen-issue/?do=findComment&comment=3999136'>More sharing options...
Anakronox Posted June 25, 2020 Share #4 Posted June 25, 2020 Sorry to hear that. Everything with regards to shipping, service, and travel is unstable at the moment. I have seen no such issues and I shoot my M10M a LOT. I cap my ISO at 6400 though and don’t really like going above 3200 if I can avoid it. I’ve left live view on for series of long exposures and see no screen flicker or lines. I did notice when using the Visoflex 20 that my M10 gets a little warm, but so far not the M10M. I may have a shoot coming up on Sunday and plan on using both extensively. I will also probably use the Visoflex/live view quite a bit too. If I have any issues, I’ll report back in this thread. Good luck with your repair. If not too late, have you talked to your dealer about a replacement? Link to post Share on other sites More sharing options...
onasj Posted June 26, 2020 Share #5 Posted June 26, 2020 Looks like a defective board. Can your Leica dealer help you? Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now