hunterspoint Posted August 9, 2017 Share #1 Posted August 9, 2017 Advertisement (gone after registration) On my TL2 using the Visoflex I only see a white screen through the eyepiece. The camera monitor is fine and am able to focus. i tried the visoflex on the T and it works fine. Is there something I am missing with the Visoflex on the TL 2? shouldn't it work the same way on the TL2 as it does on the T? The TL 2 is running firmware 1.1 Link to post Share on other sites More sharing options...
Advertisement Posted August 9, 2017 Posted August 9, 2017 Hi hunterspoint, Take a look here Visoflex problem on new TL 2. I'm sure you'll find what you were looking for!
vikasmg Posted August 9, 2017 Share #2 Posted August 9, 2017 Interesting. Could there be a residual problem with the TL2 and the Visoflex? Is there a separate brightness adjustment for the Visoflex? - Vikas Link to post Share on other sites More sharing options...
STEVEcKONG Posted August 9, 2017 Share #3 Posted August 9, 2017 Well, I don't think this is a residual problem... this often occurred to me when the EVF was not securely starched to the body... so far no problem for me... for the TL2 and the visoflex 从我的 iPhone 发送，使用 Tapatalk Link to post Share on other sites More sharing options...
hunterspoint Posted August 9, 2017 Author Share #4 Posted August 9, 2017 As a follow up, the Visoflex was very secure. I actually had a hard time removing it from the camera. I retried it with the T, no problem, tried it on the TL2 and the same thing happens. Decided to reset everything and now it works. Not sure what the problem was. Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.