hex1 Posted February 4, 2017 Share #1 Posted February 4, 2017 Advertisement (gone after registration) Hello everyone - on my function button of the leica q, I kept the 'exposure compensation' setting. I clicked on it and it worked fine, I used to use the dial to change it. For the first time after months, I realized I could also use the touch screen to move it so I did it. What happened however is that instead of just going to one side or another, I somehow split the gizmo into 3 different parts. Now when I take a picture it automatically takes it with 3 different exposures, darker, 0, and lighter.I can't seem to understand how to reset this function and have it shoot only the one exposure I have selected.Any help about this would be much appreciated. Thanks in advance Link to post Share on other sites More sharing options...
Advertisement Posted February 4, 2017 Posted February 4, 2017 Hi hex1, Take a look here Problem w/ exposure compensation. I'm sure you'll find what you were looking for!
mathorp Posted February 4, 2017 Share #2 Posted February 4, 2017 Have a look at the "Exposure Bracketing" setting (2 places below "Exposure Compensation") If it is anything other than +/- 0, you will get three exposures like you describe. Link to post Share on other sites More sharing options...
Leica Guy Posted February 4, 2017 Share #3 Posted February 4, 2017 It's a feature and I use it often. You inadvertently put it in Exposure Bracketing. AEB in Canon lingo. Just move back to only one line and you're back in a single exposure mode. Link to post Share on other sites More sharing options...
hex1 Posted February 5, 2017 Author Share #4 Posted February 5, 2017 Thank you so much guys yeah I was confused because I turned it on from the touch screen and not in the options menu. I fixed it now, much appreciated. Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.