Martin66 Posted February 27, 2016 Share #1 Posted February 27, 2016 Advertisement (gone after registration) I have made 2 user profiles. The only difference is the setting ‘\Display Setting\EVF-LCD\Auto-low sens’ (User Profile 1) and ‘\Display Setting\EVF-LCD\EVF’ (User Profile 2). When walking around the streets shooting I don’t need the LCD and to save for battery life, I use UP2, otherwise I set it to UP1. At least, that’s what seems like a good idea to me. The problem is that switching between the two profiles does not activate/de-activate the ‘Auto-low sens’ or ‘EVF’ setting. While switching between the UP’s, the ‘Auto-low sens’ or ‘EVF’ setting is changed accordingly in the menu. Go figure that… Might be a bug? Toggling ‘Auto-low sens’ vs ‘EVF’ in the Display Setting menu does the job (of course) but that takes more steps. regards, Martin Link to post Share on other sites More sharing options...
Advertisement Posted February 27, 2016 Posted February 27, 2016 Hi Martin66, Take a look here User Profiles?. I'm sure you'll find what you were looking for!
Albert Andersen Posted March 1, 2016 Share #2 Posted March 1, 2016 Hi. I have had the same problem, and have sent a report to Wetzlar. They have promised it should be solved in an firmware update. It was not included in the latest update, but maybe next time. See this topic: http://www.l-camera-forum.com/topic/253087-display-setting/ Link to post Share on other sites More sharing options...
Martin66 Posted March 1, 2016 Author Share #3 Posted March 1, 2016 That's good the hear, thanx. I addressed the issue with the Leica importer in the Netherlands (Transcontinenta) and they passed it on the Leica yesterday. We'll see. regards, Martin Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.