sfage Posted May 5, 2015 Share #1 Posted May 5, 2015 Advertisement (gone after registration) The lens hood for the V1 19mm vignettes. Anyone know of a hood that doesn't? Link to post Share on other sites More sharing options...
sc_rufctr Posted May 5, 2015 Share #2 Posted May 5, 2015 No idea... I thought you could only use the standard Leica one on the 19mm. Is there an aftermarket one? Lovely lens. Used properly than can be truly magic. I had one years ago but sold it when someone expressed a keen interest. I've been using a Canon 14mm in its place. The Canon is fine but you have to be careful using it otherwise it has loads of distortion. Link to post Share on other sites More sharing options...
tntrue Posted May 10, 2015 Share #3 Posted May 10, 2015 I found that out the hard way, after sourcing a hood separately. I ended up using mine with a thin B+H filter permanently attached. If you go that route, be sure to test the filter on the lens before buying, as the front element will protrude into contact with some filters. Inserting a tiny square of paper between lens and filter will tell you safely whether there's clearance or not. Link to post Share on other sites More sharing options...
Didinjoo Posted May 25, 2015 Share #4 Posted May 25, 2015 I own Elmarit R 2.8/19 and I don't have vignettes, I use the original the lens hood #12546. Link to post Share on other sites More sharing options...
sfage Posted May 26, 2015 Author Share #5 Posted May 26, 2015 Upon what size sensor Didijoo? Link to post Share on other sites More sharing options...
Hugh 38 Posted June 6, 2015 Share #6 Posted June 6, 2015 I have an older Elmarit 19 with hood 12529 . I have never noticed any signs of vignetting . It came with the lens which I bought second hand about 12 years ago . I have used it inside and out in a variety of lighting conditions . The sensor measures 24mm x 36mm and comes on a long roll . Each picture has a new sensor , good stuff . Welcome, dear visitor! As registered member you'd see an image here… Simply register for free here – We are always happy to welcome new members! Link to post Share on other sites Simply register for free here – We are always happy to welcome new members! ' data-webShareUrl='https://www.l-camera-forum.com/topic/244646-lens-hood-19mm-v1/?do=findComment&comment=2829101'>More sharing options...
sfage Posted June 8, 2015 Author Share #7 Posted June 8, 2015 Advertisement (gone after registration) Yeah, I wish mine was a V2 but it's a 3. I'd like to put it on my leicaflex too :/ Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.