McGirton Posted April 8, 2015 Share #1 Posted April 8, 2015 Advertisement (gone after registration) As the title states, is it possible to put a M6 TTL top plate on a M7? I am thinking about buying and painting / coating one to customise my M7 with it. Or get a millennium edition top plate. That version has the M2 rewind knob though, so I am not sure if that is a problem. I am aware the M7 is a bit higher than the older M cameras, but what about the TTL? Does anybody have knowledge / experience with this kind of operation? Thanks in advance! Link to post Share on other sites More sharing options...
Advertisement Posted April 8, 2015 Posted April 8, 2015 Hi McGirton, Take a look here M6 TTL top plate on M7?. I'm sure you'll find what you were looking for!
wattsy Posted April 13, 2015 Share #2 Posted April 13, 2015 I think size-wise, the M6TTL and M7 plates are exactly the same (both slightly taller than the standard M6 and MP) but I'm not sure if the on/off switch on the M7 necessitates a different size hole for the shutter release. Regarding the Millennium top plate and its M2/MP style rewind knob, I don't think it would be a problem in principle (after all, the Millennium edition shows that it can be done with the taller M6TTL/M7 camera body) but it's worth noting that Leica do not offer the "MP style" rewind for the M7 as an à la carte option (whereas they do offer the "M7 style" slanted rewind as an option for the MP) so there may be a technical reason why it is not possible. Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.