ebenstein Posted March 7, 2015 Share #1 Posted March 7, 2015 Advertisement (gone after registration) when the 240 first came out, i had a similar problem. with the first update in firmware, the problem went away. now, it is here again: when i set the max iso to 1600 and the shutter speed to 1/f, the iso stays at 200 and the shutter speed falls below 1/f. is anyone else having this problem? Link to post Share on other sites More sharing options...
Advertisement Posted March 7, 2015 Posted March 7, 2015 Hi ebenstein, Take a look here auto iso is not working. I'm sure you'll find what you were looking for!
wparsonsgisnet Posted March 7, 2015 Share #2 Posted March 7, 2015 Go to post 114 in the FAQ thread: http://www.l-camera-forum.com/leica-forum/leica-m-type-240/308500-leica-m8-m8-2-m9-m9p-6.html for info about this. Link to post Share on other sites More sharing options...
ebenstein Posted March 8, 2015 Author Share #3 Posted March 8, 2015 thank you for the link. i discovered the solution on my own, but it worked just as the link suggested. after i made the post, i realized that the camera was not reading the lens correctly - the frames were for a 50 mm lens, not a 28 mm lens. so i unscrewed the lens and screwed it in again. thereafter the lens had the correct lines and the auto iso worked. go figure. Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.