carlos.paula Posted February 18, 2015 Share #1 Posted February 18, 2015 Advertisement (gone after registration) Hello, friends. Anyone here had a compatibility problem using the Leica Digital Capture in Windows 7? I install the program, which cames with my camera. Running it, I plug my M8 via USB cable and the program recognizes it, showing the serial number. But, after the adjustments that the program offers, I take a picture remotely; the camera fires according, but no image is transfered to my PC and a error message appears: Thumbnail Error 2. Thanks a lot. Link to post Share on other sites More sharing options...
Advertisement Posted February 18, 2015 Posted February 18, 2015 Hi carlos.paula, Take a look here Leica Digital Capture. I'm sure you'll find what you were looking for!
boliston Posted February 19, 2015 Share #2 Posted February 19, 2015 i remember trying it with my m8 and i think i got the same - fires shutter but nothing recorded Link to post Share on other sites More sharing options...
tobey bilek Posted February 19, 2015 Share #3 Posted February 19, 2015 It may have something to do with the M8 not being able to be set to mass storage device. Picture Control Protocol is all that is available. Later cameras have both and mass storage is by far the better option if you download from the camera USB which is what teathered is doing. Check the program to see if mass storage is required. Use a newly formatted card with nothing but teathered pictures and keep the count low Lastly try raw + basic JPEG . Both will record, but only the JPEG will read. The raw should read in editing program. Link to post Share on other sites More sharing options...
carlos.paula Posted February 20, 2015 Author Share #4 Posted February 20, 2015 I asked Leica Camera about that and they told me that the program is not compatible with Windows 7 or 8, only with XP. There is no way or alternative solution, and the program was descontinued. Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.