Tembusu44 Posted January 5, 2015 Share #1 Posted January 5, 2015 Advertisement (gone after registration) Hi, Has anyone experienced this when using the focus assist function for manual focusing - when I use this magnification function to focus and then click the shutter, the picture taken is at the magnification level. So the image is a zoomed in image. Previously I have used this function and this never happened when I took the picture after using this function. I have not upgraded to the newest firmware. Link to post Share on other sites More sharing options...
Advertisement Posted January 5, 2015 Posted January 5, 2015 Hi Tembusu44, Take a look here Problem with mnaual focus assist function. I'm sure you'll find what you were looking for!
soundsgoodsg Posted January 5, 2015 Share #2 Posted January 5, 2015 This is an occasional glitch that does happen, but if you are recording JPG+DNG, the DNG file is correct. This should solve itself with a simple power down / power up. I haven't had this problem in a while (I am on 1.3) because I prefer using the visoflex and running the camera in high-contrast B&W mode which makes focussing a lot easier (IMHO) but in this instance, the JPGs recorded are B&W; I process my images via the DNG files. Link to post Share on other sites More sharing options...
Tembusu44 Posted January 5, 2015 Author Share #3 Posted January 5, 2015 thanks. I have installed 1.3 and the problems seems to have solved. Will monitor best wishes for 2015 Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.