robertwright Posted May 6, 2007 Share #1 Posted May 6, 2007 Advertisement (gone after registration) After the TOP review I did look at some of his points, and considering the LCD, has anyone noticed that the usable viewing angle is pretty average from the left and right, and good from below, but very bad from above? could the lcd be mounted upside down? I know this is kind of weird, but there is a big difference in brightness from above and below, and from below, it is very usable. From above, not so much. Link to post Share on other sites More sharing options...
Advertisement Posted May 6, 2007 Posted May 6, 2007 Hi robertwright, Take a look here LCD upside down. I'm sure you'll find what you were looking for!
gravastar Posted May 6, 2007 Share #2 Posted May 6, 2007 I think the LCD is deliberately designed to be viewed at an angle equivalent to "below". When you look at the LCD it's natural to lower your arms and tilt the front of the camera towards the ground. Bob. Link to post Share on other sites More sharing options...
robertwright Posted May 6, 2007 Author Share #3 Posted May 6, 2007 i mean tipped forward. try it. like you are almost looking at the bottom plate. better than almost looking at the top plate. Link to post Share on other sites More sharing options...
robertwright Posted May 6, 2007 Author Share #4 Posted May 6, 2007 I guess you are right, when the camera is level facing down, your head is necessarily "below" from a relative angle. I guess the difficulty comes when you are outdoors and you deliberately tip the camera towards you to try to shade it from sun, then you are looking more from the top, which is when it is not good. Plus not good outdoors good. ignore me, moving right along.... Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.