jolsmtl Posted May 4, 2014 Share #1 Posted May 4, 2014 Advertisement (gone after registration) I replaced my damaged D-Lux 3 with a D-Lux 6 and am very happy with it, except for one major problem: I haven't found how to make it save raw files (.RWL). Picture Size offers 3M, 2.5M and .3M and Quality two grades. None of these combinations gives anything other than JPGs. What am I overlooking in this rather complicated set of menus? Link to post Share on other sites More sharing options...
Advertisement Posted May 4, 2014 Posted May 4, 2014 Hi jolsmtl, Take a look here my D-Lux 6 saves only JPGs. I'm sure you'll find what you were looking for!
nikau Posted May 4, 2014 Share #2 Posted May 4, 2014 In menu 1 of the Record section, scroll down to 'quality', click to the right which will bring up various raw options. Choose one and it's done. Link to post Share on other sites More sharing options...
owen27 Posted May 5, 2014 Share #3 Posted May 5, 2014 Also note the dial which you are in? I think in some settings you can't save raw? I might be wrong Link to post Share on other sites More sharing options...
jolsmtl Posted May 5, 2014 Author Share #4 Posted May 5, 2014 After checking with a memory stick on which I saved some photos earlier, I see that it was saving raw files properly until three days ago, when I flew from Vienna to Berlin. I strongly suspect that the security inspection (X-rays and who knows what else) altered the firmware. Beware! I'll try to find out from Leica how to remedy this. Thanks for your replies. Link to post Share on other sites More sharing options...
Guest Posted May 5, 2014 Share #5 Posted May 5, 2014 I replaced my damaged D-Lux 3 with a D-Lux 6 and am very happy with it, except for one major problem: I haven't found how to make it save raw files (.RWL). Picture Size offers 3M, 2.5M and .3M and Quality two grades. None of these combinations gives anything other than JPGs. What am I overlooking in this rather complicated set of menus? siehe Bedienungsanleitung Seite 136 10M / 7M* / 5M** // 3M, 2M, 0,3M*** / 90mm / *107mm / **128mm / ***135 + 160mm. 1) JPEG-fein 2) JPEG 3) RAW+JPEG-fein 4) RAW + JPEG 5) RAW kind regards, kmhb Link to post Share on other sites More sharing options...
mrware Posted May 8, 2014 Share #6 Posted May 8, 2014 Check that it isn't on the auto setting. I do not believe auto makes anything but jpg format. P, S, A, and M will do raw, jpg or both. Update: Ah, I missed Owen's post. It looks like he got you going in the right direction. Link to post Share on other sites More sharing options...
jolsmtl Posted May 16, 2014 Author Share #7 Posted May 16, 2014 Advertisement (gone after registration) Happy ending! Finally at home from my trip, I took my problem to my Leica dealer. He immediately showed me the Reset option (menu 5 under Setup) .A couple of clicks put everything back in order. The three missing Quality options had returned, and it now saves raw files again. Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.