holgerf Posted April 13, 2007 Share #1 Posted April 13, 2007 Advertisement (gone after registration) Now that the IR issue is solved from Leicas side (except filter backorders) - what about an adequate profile from PhaseOne for Capture One? In the answers to my mails I sent to PhaseOne they state that version 3.7.7 will have a new profile corresponding to firmware 1.102 and IR filters. When will it be available? Quote of PhaseOne: "3.7.7 is out very shortly, most likely within the next couple of weeks." So at least we will not have to wait for the overdue C1 4.0. Anyway, patience requested Best Holger Link to post Share on other sites More sharing options...
Advertisement Posted April 13, 2007 Posted April 13, 2007 Hi holgerf, Take a look here New M8 Profile for CaptureOne. I'm sure you'll find what you were looking for!
Guest guy_mancuso Posted April 13, 2007 Share #2 Posted April 13, 2007 Thanks Holger was thinking the same thing Link to post Share on other sites More sharing options...
Venkman Posted April 13, 2007 Share #3 Posted April 13, 2007 Question is, will that be a "major" update? If so, the LE users will lose their "free" update before 4.0 hits the shelf. Link to post Share on other sites More sharing options...
Guest guy_mancuso Posted April 13, 2007 Share #4 Posted April 13, 2007 Probably not. there saving everything for version 4 LE which will be out before the pro version Link to post Share on other sites More sharing options...
blakley Posted April 13, 2007 Share #5 Posted April 13, 2007 I had hoped for this, but I broke down and got Lightroom, and its interface is SO much easier to use and more logical (not to mention that it's much faster than C1 and uses less memory etc...), so I no longer really care. Link to post Share on other sites More sharing options...
rwfreund Posted April 13, 2007 Share #6 Posted April 13, 2007 I view camera profiles to be almost useless unless one shoots on strictly controlled lighting conditions. Illuminant quality and temperature have a major impact and even lenses have slight color casts. If one were to make the mistake of using "auto" white balance, then any attempt at profile reliance will be thwarted. I really am finding Lightroom to be a pretty useful solution for most of what I need, although I wish its capability of dealing with off-line archives were a bit better. -bob Link to post Share on other sites More sharing options...
eronald Posted April 13, 2007 Share #7 Posted April 13, 2007 Advertisement (gone after registration) Now that the IR issue is solved from Leicas side (except filter backorders) - what about an adequate profile from PhaseOne for Capture One? In the answers to my mails I sent to PhaseOne they state that version 3.7.7 will have a new profile corresponding to firmware 1.102 and IR filters. Holger Leica is sending me a new camera, which should arrive on Tuesday. If it gets here next week, really, then I should have a new profile up by the end of the week. In the mean time, maybe Guy can tell us whether Tuned2 is still ok with the new firmware. While I don't have a Leica, I'm tuning my 5D profile; next after that comes the 400D. Edmund Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.