rramesh Posted July 26, 2013 Share #1 Posted July 26, 2013 Advertisement (gone after registration) Using an M9-P with firmware 1.192. When the SD Card gets near full, say 25-50 photos left on a 16GB Sandisk Extreme, the camera hangs. Only solution is to remove battery. Is this an issue with this firmware or should I ensure that I only fill 75% of the SD card before replacement? Link to post Share on other sites More sharing options...
Advertisement Posted July 26, 2013 Posted July 26, 2013 Hi rramesh, Take a look here A near full SD Card causes camera to hang. I'm sure you'll find what you were looking for!
k-hawinkler Posted July 26, 2013 Share #2 Posted July 26, 2013 Using an M9-P with firmware 1.192. When the SD Card gets near full, say 25-50 photos left on a 16GB Sandisk Extreme, the camera hangs. Only solution is to remove battery. Is this an issue with this firmware or should I ensure that I only fill 75% of the SD card before replacement? Old news really. That's why many forum folks use Panasonic Gold cards. You would be amazed about the wealth of information you find if you searched the forum for those two words. Good luck. Link to post Share on other sites More sharing options...
marknorton Posted July 26, 2013 Share #3 Posted July 26, 2013 I use SanDisk cards and have never seen this problem. Link to post Share on other sites More sharing options...
k-hawinkler Posted July 26, 2013 Share #4 Posted July 26, 2013 I use SanDisk cards and have never seen this problem. You got lucky! Others and I have. Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.