hammam Posted March 24, 2007 Share #41 Posted March 24, 2007 Advertisement (gone after registration) The SB-80DX and SB-800 have hotshoe voltage below 6 V. according to this site: « http://aaronlinsdau.com/gear/articles/flashvoltage.html » They shouldn't do any damage to the M8. I have used both on my M8 - though not much - without any problem. The A mode is really very good, even bounced. Link to post Share on other sites More sharing options...
Advertisement Posted March 24, 2007 Posted March 24, 2007 Hi hammam, Take a look here Strobes & M8 compatability?. I'm sure you'll find what you were looking for!
SteveP Posted March 24, 2007 Share #42 Posted March 24, 2007 This is a nice little fill flash with bounce DS20 Sunpak DS-20 5-Position Bounce-Tilt Shoe Mounted Slave Flash with Wireless Auto Slave. Link to post Share on other sites More sharing options...
London Lad Posted March 24, 2007 Share #43 Posted March 24, 2007 FWIW my Leica dealer (Just down the road in France) says there is a new Leica flash gun due in a month or two and he is not ordering any more of the SF-24s for stock. Any one else heard anything ? Link to post Share on other sites More sharing options...
grober Posted March 24, 2007 Share #44 Posted March 24, 2007 FWIW my Leica dealer (Just down the road in France) says there is a new Leica flash gun due in a month or two and he is not ordering any more of the SF-24s for stock. Any one else heard anything ? Good news IF this rumored flash has a tilting head. Swiveling would be nice too but this would only add to the bulk and cost of any new flash wearing a Leica badge. Give me a small tilting flash, certified for use with the M8, and I'll buy one. -g Link to post Share on other sites More sharing options...
fjmcsu Posted March 25, 2007 Share #45 Posted March 25, 2007 I came upon this site while researching voltages on flash units. I was looking to see if the Nikon SB28Dx would work on the M8 since I have one that I rarely use since using CLS with the 3 SB-800's I have & the D2x.I tried it on the M8 & no problem.I also used the SB-800 in A mode(as I did in the 28Dx) & again no problems. Photo Strobe Trigger Voltages Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.