eyedeebee Posted September 1, 2011 Share #1 Posted September 1, 2011 Advertisement (gone after registration) Does anyone know if a Metz 32mz3 flash with a SCA 3501 adaptor will offer TTL flash with a a M6TTL? Thanks Link to post Share on other sites More sharing options...
Advertisement Posted September 1, 2011 Posted September 1, 2011 Hi eyedeebee, Take a look here M6 TTL Flash compatibility. I'm sure you'll find what you were looking for!
madNbad Posted September 2, 2011 Share #2 Posted September 2, 2011 It may be a 3502 for the M6 TTL. Link to post Share on other sites More sharing options...
eyedeebee Posted September 6, 2011 Author Share #3 Posted September 6, 2011 I managed to do some further research and the SCA 3501 adaptor does allow for TTL flash with this Metz model on a M6TTL, but I understand early examples of the adaptor may not work properly with some other Metz flashes. My only issue now is that the flash is bigger than the camera body! Link to post Share on other sites More sharing options...
madNbad Posted September 7, 2011 Share #4 Posted September 7, 2011 I had a 54 MZ-3 for my Hasselblad and thought about getting and adapter for my M6 TTL but the flash was the same size as the camera! I ended up with an SF 24 which works great and won't make the camera fall over (much) when it's attached. I did ad a Leicagoodies flash defuser and a Nikon SC-28 sync cord to allow TTL functions when the flash is off the camera and have been pleased with the results. Link to post Share on other sites More sharing options...
juergen Posted September 7, 2011 Share #5 Posted September 7, 2011 According to this List it is the 3502 Version M or older. Juergen Link to post Share on other sites More sharing options...
juergen Posted September 7, 2011 Share #6 Posted September 7, 2011 According to this List it is the 3502 Version M or older. Juergen Should read "Version M or newer" Link to post Share on other sites More sharing options...
eyedeebee Posted September 7, 2011 Author Share #7 Posted September 7, 2011 Advertisement (gone after registration) The Metz list is certainly a useful resource. I note it doesn't refer to the 3501 at all, so am assuming that the 3502 must have been it's replacement at some point. I went back and checked the M6TTL manual (doh! don't know why I didn't start there!), which confirms that a 3501 will allow TTL flash. Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.